p r e f a c e

Replacing the fuse

Should the mains fuse blow replace it only with an equivalent part. The fuse holder is located just below the mains inlet socket. To replace the fuse disconnect the product from the mains supply. Using a flat blade screwdriver remove and replace the fuse. If the fuse blows a second time there is a fault in the product. Contact your local retailer.

Mains voltage operating range

AV 5150 Active Isobarik Bass Speaker

115V, 230V +/- 10%, 50-60Hz.

Setting the mains operating voltage

All products with a voltage selector switch must be set to the local mains supply voltage before connecting to the mains supply.

Please check the setting of the voltage selector switch at the mains input socket before connecting the product to a mains supply.

To set the mains operating voltage unplug the mains supply cable and using a flat blade screwdriver turn the selector switch to the appropriate voltage.

Warning!! The power supply may be destroyed if it is connected to 240V when set for 120V.

Power consumption

Product

Operate mode

Standby mode

AV 5150 Active Isobarik

25W-850W

5W

Bass Loudspeaker

 

 

 

 

 

Switching the product on and off – standby operation

AV 5150 Active Isobarik Bass Speaker

The AV 5150 contains circuitry which senses the presence of an audio signal and powers up the product. The AV 5150 remains powered up for several minutes after the audio signal disappears, then reverts to standby mode, consuming very little power. Standby mode is indicated by the front panel indicator glowing red. Full operation is indicated by the front panel indicator glowing green. The mains switch (behind the control area cover) switches the product OFF completely or ON. If, after three minutes, the AV 5150 does not sense an audio signal it will switch to standby mode.

Positioning the products and heat

All electronic products generate some heat. Audio products, in particular audio power amplifiers, have to handle and dissipate large amounts of power. It is essential to provide adequate ventilation to allow this heat to dissipate into the environment. All Linn products are fully protected against overheating and will shut down before any component becomes over heated. However the products will last longer and perform better if they are kept cool. The AV 5150 Active Isobarik Bass Speaker keeps its power amplifier semiconductors cool by transferring the heat on to the extruded heatsink. As a result the extrusion will become warm in use.

Copyright and acknowledgements

Copyright © Linn Products Limited.

Linn Products Limited, Floors Road, Waterfoot, Glasgow, G76 0EP, Scotland, United Kingdom.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher.

Printed in the United Kingdom.

AV 5101, AV 5103, AV 5105, AV 5110, AV 5120, AV 5140, and AV 5150 are trademarks of Linn Products Limited.

The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Linn Products Limited. Linn Products Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Part no: PACK 739

This manual was produced by Human-Computer Interface Ltd, Cambridge, England.

iv

Page 6
Image 6
Linn AV Loudspeaker Replacing the fuse, Mains voltage operating range, Switching the product on and off standby operation

AV Loudspeaker specifications

Linn AV Loudspeakers represent a harmonious blend of advanced audio engineering and exquisite design, aiming to deliver a captivating listening experience for both music and home theater enthusiasts. Renowned for their commitment to high-fidelity sound, Linn has crafted loudspeakers that stand out in terms of performance, aesthetics, and innovation.

At the core of Linn's design philosophy lies their proprietary technologies, which enhance audio playback quality. One notable feature is the use of Linn's unique "Katalyst" technology, present in some of their premium models. Katalyst optimizes the performance of the digital-to-analog conversion process, resulting in a more precise and dynamically coherent sound. This technology enables listeners to hear music as it was intended by the artists, capturing details and nuances that are often lost with conventional systems.

Another standout characteristic of Linn AV Loudspeakers is their modular construction. Many models feature interchangeable components that allow for customized configurations, catering to individual preferences and room acoustics. This flexibility instills confidence in users, knowing that they can adapt their system as their listening environment or requirements evolve over time.

The design of Linn loudspeakers is not only functional but also aesthetically pleasing. The cabinets are often crafted from high-quality materials, undergone extensive testing to minimize unwanted vibrations and resonances. This meticulous attention to detail is evident in the sleek finishes and elegant lines, effortlessly blending the speakers into any home decor.

Additionally, Linn's commitment to acoustic performance is reflected in their driver technology. The loudspeakers feature specially designed drive units that provide excellent transient response and low distortion. This results in clear highs, well-defined mids, and a robust low-end bass, ensuring an immersive audio experience.

When it comes to connectivity, Linn AV Loudspeakers are versatile, supporting various input options to accommodate modern audio sources. Many models are equipped with wireless streaming capabilities, allowing for easy integration with contemporary streaming services and smart devices.

In conclusion, Linn AV Loudspeakers exemplify the perfect marriage of advanced technology, modular flexibility, and elegant design. Their dedication to high-fidelity sound reproduction and innovative engineering continues to set them apart in the audio industry, making them an appealing choice for audiophiles and home theater enthusiasts alike.