Linn AV Loudspeaker setting up the AV 5110

Unpacking

Each pair of AV5110 loudspeakers comes in a box with the following

accessories:

Four rubber feet.

A manual.

Badge.

We recommend you retain the packaging in case you need to transport

the loudspeakers at a later date.

setting up the AV 5110

Positioning AV 5110 loudspeakers

The fully screened drive units allow you to place the AV 5110 in virtually

any location, without the risk of magnetic interference, making it ideal for

use in an AV system or with a multimedia PC. Its small size and excellent

performance also makes it perfect for most multi-room or communications

applications. In addition, its durable, weather resistant, flame retardant

and UV stable cabinet ensures that the AV 5110 is suitable for many

professional, commercial and industrial applications.

The AV 5110 is easy to accommodate either free standing, mounted on

stands, or wall-mounted using Linn BRAKITs for omni-directional

orientation (Linn part number: BRAKIT/1).

Note that the AV 5110 is weather resistant but not waterproof, so should

not be left outdoors.

19

setting up the AV 5110

Contents

Main Page Important safety information i GENERAL SAFETY INSTRUCTIONS ii UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION Fuse replacement iii Mains plug replacement WARNING Replacing the fuse 115V /100V setting (if available): T6.3A. CSA approved. iv Mains voltage operating range AV 5150 Active Isobarik Bass Speaker Setting the mains operating voltage Power consumption v FCC notice contents vi introduction The Linn AV System AV 5103 System Controller AV 5101 Personal Handset AV 5105 Stereo Power Amplifier AV 5140 Floor-Standing Loudspeaker AV 5120 Compact Loudspeaker AV 5110 Local Loudspeaker AV 5150 Active Isobarik Bass Speaker Page About the AV 5105 Stereo Power Amplifier Using the AV 5140 and AV 5120 loudspeakers Using the AV5140s as front loudspeakers using the AV loudspeakers using the AV loudspeakers Using a pair of AV 5120 loudspeakers as main loudspeakers 7 Page Using the AV 5150 Active Isobarik Bass Loudspeaker 9 using the AV loudspeakers Page setting up the AV 5140 and AV 5120 Positioning AV 5140 loudspeakers Positioning the AV5140 loudspeakers near a rear wall Using the AV5140 loudspeakers with a centre loudspeaker Positioning the AV5140 loudspeakers near a television 12 setting up the AV 5140 and AV 5120 Positioning the AV 5120 loudspeaker Using the AV5120 as a centre loudspeaker Positioning the AV 5120 loudspeaker above or below a television Using a pair of AV 5120 loudspeakers as main loudspeakers Page Connecting the AV 5140 or AV 5120 loudspeakers Using bare wires Installing the linking plates Page Page Removing the grilles and cleaning the loudspeakers setting up the AV 5110 Positioning AV 5110 loudspeakers Wall mounting Removing the grilles Painting the AV 5110 Removing the grilles Page setting up the AV 5150 Positioning Fitting the casters Fitting spikes Page Page Connecting the AV 5150 Active Isobarik Bass Speaker Connecting the mains supply Connecting the AV 5150 to a stereo preamplifier Connecting to the AV 5103 System Controller Protecting the Speaker Page Adjusting the AV 5150 Removing the panel Adjusting the frequency response Adjusting the output impedance Protecting the speaker Inverting the phase response Page guarantee and service guarantee and service Warning 31 Important technical information technical information AV 5120 Compact Loudspeaker 32 AV 5110 Local Loudspeaker 33 AV 5150 Active Isobarik Bass Speaker technical information a (continued) index index 34 c 35 f index g i