Haier HWM85-728 Use the operation buttons, Connection between the water inlet hose and the washer

4 Use the operation buttons

Connection between the water inlet hose and the washer

RESERVE(HOURS)
REMAIN(MINUTES)							66L	70L
					SOAK	MEMORY	STANDARD 57L	62L	POWER
							46L	52L
						HEAVY
					WASH		COTTON	40L
R	S	W	R	S			34L		ON/OFF
E
S	O	A	I	P	RINSE	CHILD	WOOL
E			N					26L
R	A	S	S	I			18L		START
V	K	H		N
E			E			QUICK	TUB DRY
					SPIN
	(M	(M)							PAUSE
(H)			(T)	(M)

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately.

2 Put the nut of the water inlet hose on the valve jointer.

3 Fasten the nut. Swing it gently to confirm if it's suitable.

nut of the water inlet hose

		WATER
SELF-PROGRAM		LEVEL
	PROCESS	PROGRAM

jointer of the	water absorption
water inlet valve	cushion.

Connection between the jointer of the water inlet hose and the water inlet hose

Mode and meaning of the indicators

The light is off

1.Push down the slider. Insert the water inlet hose into the jointer.

Locking level

2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.

the jointer of the water inlet hose

Slider

Flashing: indicate the running program or indicate the water level

On: indicate the program about to run, or indicate the selected mode or indicate the water level

1 "POWER ON/OFF"button

Check the connection between the jointer of the water inlet hose and the water faucet

POWER	Push the "POWER ON/OFF"button to switch on the power.
	Under power-on mode, push it to switch off the power.
ON/OFF
	Push the "POWER ON/OFF" button to switch on the power. If the "START/PAUSE"button is not pushed, the
	machine will switch off the power automatically after 5 minutes.

2 "PROGRAM"button

Program Applicable situation

STANDARD Washing the normal laundries

HEAVY Washing the bigger and heavier lanudries

GENTLE Washing the woolen textiles or underwear

QUICK Quick waching of the light dirt laundries

PROGRAM

BLANKET Washing the blanket

COTTON Washing the cotton textiles

WOOL Washing the woollen textiles

Drying the inner tub and the outer tub, which can avoid growing mildew.(after washing clothes,there is dampness between the inner tub and the outer tub, the wall of the inner tub

TUB DRY

and out tub can breed mildew, where you can choose thetub dry program, Drying the inner

tub and the outer tub, keeping the inner tub and outer tub dry, which can avoid growing mildew.

1.Swing the hose gently to confirm if it is fastened stable.

2.After installation, open the faucet to check if it leaks.

3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.

Dismantle the water inlet hose

1.Close the water faucet.

2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.

If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.

Locking level Slider