Haier XQB60-91BF user manual Selecting Water Level, Water Level Button Water Level Position

XQB60-91BF MANUAL 10/22/01 11:42 AM Page 14

English

Selecting Water Level:

When you turn the power "ON", the initial water level is set at 6th position.

Note: • For normal, synthetic and gentle cycle, you can select water level between 1-10 position.

•In the quick cycle mode the water level is preset to the 2nd position. The washer begins to wash clothes once the water has reached the 2nd level. Water in this mode fills until the 4th level is reached.

Press the water level button to increase or decrease the water level as indicated in the chart below to select the proper water level setting for the load size.

Water Level Button	Water Level Position
Preset from the factory	6
Press one time for	7
Press two times for	8
Press three times for	9
Press four times for	10
Press five times for	1
Press six times for	2
Press seven times for	3
Press eight times for	4
Press nine times for	5
Press ten times to go back
to its preset position	6

Note: Position “1” as the lowest level.

Position “5” as the medium level.

Position “10” as the highest level.

13