English
Unpacking Your Appliance
•Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove bottom styrofoam that is used to secure the washer from shipping damage due to vibration and shock.
•Inspect and remove any remains of packing, tape or printed materials before using the washer.
Leveling Your Washer
•Your washer has 4 leveling legs; which are located on the four bottom corners. After properly placing your washer in its final position, you can level your washer.
•Leveling legs can be adjusted by turning them counterclockwise to raise your washer or turning them clockwise to lower your washer.
Balance Display (Leveling Indicator)
The "Balance Display" is located at the left upper top corner of the washer. This display shows if the washer is leveled properly.
•If the washer is leveled properly, the "Air Bubble" will be at the center.
•If the washer is not leveled properly, you will see that "Air Bubble" is either at left, right, front or back. You may need to find the flat hard surface to put the washer on and need to level the legs to balance it.
23