Haier XQB60-91BF user manual Grounding Instructions, Power Interruptions, Wiring Requirements

Page 29

XQB60-91BF MANUAL 10/22/01 11:42 AM Page 29

English

Electrical Connections

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounded plug. The plug must be inserted into an outlet that is properly installed and grounded.

•Improper use of the plug can result in a risk of electric shock.

•Consult a qualified electrician or service person if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded.

Wiring Requirements:

•This appliance must be plugged into at least 15 AMP 115-120 VOLT,

60 HZ GROUNDED OUTLET.

Note: Where a standard two-prong

 

outlet is encountered,

 

it is the personal responsibility

 

and obligation of the

X

consumer to have it replaced

with a properly grounded

three-prong outlet.

Extension Cords:

We do not recommend that you use an extension cord.

Power Interruptions

Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored re-plug power cord to AC outlet. If outage is for a prolonged period, clean washer before using it again.

28

Image 29
Contents XQB60-91BF Read all instructions before using the appliance Important Safety InstructionsWarranty service Table Of Contents Hand-Wash System Understanding Your Hand Wash WasherCascading Water Fall Omni-Direction FlowOperating Instructions Parts and FeaturesEnglish Start/Pause Button Power ButtonUnderstanding the Control Panel Temperature Select Button Delay Start ButtonBalance Display Leveling Indicator Select ButtonProper Use of Dispenser Understanding the Function Light IndicatorLoading the Washer Proper Use of Detergent Proper Use of Fabric SoftenerProper Use of Bleach FilterSelecting Wash Cycle Select Button Cycle Type Wash Cycle OptionsSelecting Current Level Water Level Button Water Level Position Selecting Water LevelWASH/RINSE Types of Fabrics Selecting Wash/Rinse TemperatureClosing the Top Lid End of Cycle SignalSteps for the Wash Process Normal Operating SoundsCleaning and Maintenance Care and Cleaning GuideStorage of Your Appliance in Cold Environment Moving & VacationingWasher does not operate TroubleshootingProblems with water Machine beeps and display shows error codesWasher is making noise Problems with clothesTools and Materials Required Accessories Supplied QuantityLeveling Your Washer Balance Display Leveling IndicatorUnpacking Your Appliance Installation Pre-Requirement Steps for InstallationInstalling the Bottom Panel Installing Your WasherSink For Large Inside thread Installing Quick Sink AdapterFor Outside Thread Unit Dimensions Wiring Requirements Power InterruptionsGrounding Instructions Extension CordsLimited Warranty New York, NY Haier America