Disposal after washing Using process
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the detergent box and set it on the control panel seat. 
1.The method of dismantle : Push it up aslant and gently.
2.The method of install : install it upwards and aslant and push it in .
The lint filter must be used during washing. It must be cleaned in time after each using
Lint filter:
1.Rotate the inner tub with hand till the lint filter reaches the position convenient for you to take it off. Pull it up to dismantle.
2.Push it down to install.
3.Clean the filter screen after washing.
DismantleInstall
DismantleInstall
Dismantle | Install |
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet.
Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
Petrol Alcohol
Thinner
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid.