“CHILD LOCK” function
Push and hold the water level button and spin button, then push down the power on/off button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the start/pause button. The child lock function is activated. All of the buttons are locked and cannot make selection.
Release the child lock function: push down the water level and spin button at the same time for more than 1 second. After a beepsound, the child lock function is released.
Reserve/remain time indicator digitron
During sensing, it displays
During reserve procedure, it displays the remained reserve time (in hours)
During operation of programs, it displays the remained time (minutes). If the remained time exceeds 99 minutes, it adopts A at tens place to represent 100 minutes, b to represent 110 minutes. For instance, A3
represents103 minutes. |
| |
In case of abnormal phenomenon, it displays |
| |
Page16 | ||
the abnormal symbol (see to Page 16) | ||
|
“••• • • •••••” button
Push the ON/OFF button to switch on the power.
When the power is on, push it again to switch off the power.
Push the ON/OFF button to switch on the power. If the start/pause button is not pushed, the washing machine will automatically switch off the power after 5 minutes.
WM6002A
9 | 10 | Time remianed | ||
(minutes) | ||||
7 | 8 | |||
Reserve | ||||
5 | 6 | |||
(hours | later) | |||
|
| |||
|
|
| ||
34
12
+ | WATER | RESERVE |
CHILD LOCK |
| |
LEVEL |
| |
|
|
| NORMAL | |
| QUICK | |
FIBRE | POSTHASTE | |
COTTON | JEAN | |
WOOLLEN | ||
| ||
SILK |
|
PROGRAM
START
PAUSE
POWER
ON/OFF
Start/Pause button
After the power is switched on, push it to Start the machine
During working, push it to pause working. 
During pause, push it to resume working.
“••••• •••••” button
The washing machine can detect the laundries automatically. After detection,it will set the water level to suitable value among 4, 6, 8and 10 automatically.
You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You must set suitable water level by yourself.
If posthaste program is selected, it will display water level 3 . When water level 2 is reached in water filling, it will perform washing while filling water.When water level 3 is reached, it will change to normal washing.
During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the different moisture level of the laundries.
“•••••••” button
In normal operation mode, the reserve indicator light is off. The time remain indicator light is on. The digitron displays the time remained (in minute) before the washing is finished.
Push down the reserve button. The reserve indicator light is on the digitron displays the reserve time of finishing washing (in hour). When the machine is started, the reserve indicator light is on, indicatingthat the reserve function is running.
“•••••••” selection button | ||
Following automatic programs are available for selection | ||
PROGRAM | Applicable situation | |
|
|
|
NORMAL | Common washing | |
QUICK | Quick and | |
POSTHASTE | Super quick wash of the laundry under 1 kg with light soil | |
|
|
|
JEAN | Washing the relatively big and thick laundriesr | |
|
|
|
FIBRE | Washing the chemical fiber laundries | |
|
|
|
COTTON | Washing the cotton textiles | |
|
|
|
WOOLLEN | Washing the woollen textiles | |
SILK | Washing the silk textile | |