Trouble Shooting
1.If your child restraint is not held securely by the belt:
Press down firmly on the child restraint and remove all the slack in the belt. Make sure the belt buckle is not up against the child restraint where the belt cannot be tightened.
Review Locking Clip section and Top Anchorage Strap Section. If you cannot secure the child restraint tightly, move it to another seating location.
2.If the child restraint buckle or harness release lever sticks or you cannot get the straps tight enough around child:
DO NOT LUBRICATE. Check around buckle and harness release lever for dropped food, sticky spilled drinks, dirt, leaves, etc. Clean with warm water and/or remove object with tweezers. If you cannot get the harness to adjust and remain tight with the buckle securely locked, do not use the child restraint.
3.If your harness twists or ropes:
Straighten the harness each time you put your child in the seat to help prevent twisting. Lock the buckle and tighten harness and it will be ready for next use.
4.In
Remove all the slack in the vehicle belt. Make sure the belt buckle is not up against the child restraint where the belt cannot be tightened. If you cannot secure the child restraint tightly, move it to another seating location.
5.In
Try moving the child restraint toward the center of vehicle or move the vehicle seat forward or back. Check to see if your vehicle has adjustable shoulder belt anchor points.
Do Not place the shoulder belt behind the child.
Installation Tips:
When using the interal harness, the harness must be positioned at or above the child’s shoulders.
When using the interal harness, make sure the vehicle lap belt is locked.When you grasp the child restraint at the belt path, it should not move more than about an inch side to side.
42 | 43 |
