Belt-Positioning Booster Installation

3

Secure the shoulder belt

through one of the

 

notches in the shoulder

 

belt guide.The belt

Belt-

1

2

Place child restraint against the back of the vehicle seat. NOTE: Tuck the top anchorage strap and hook under the child restraint.

Place the child’s bottom and back flat against the child restraint.

Place lap belt across child’s thighs. Lock buckle.

NOTE: If your child restraint has armrests, make sure the lap and shoulder belt are placed under armrest as shown.

should cross the base of

the child's neck and

across the chest (not the

face or neck). Pull up on

the shoulder belt to

tighten.

Check periodically to

ensure your child has not

moved out of position

and loosened the

shoulder belt.

!WARNING

Check vehicle instructions for more information about air bag/child restraint use.

Do Not Use only the lap belt when using this seat as a belt-positioning booster without the internal harness.

The shoulder belt must always be adjusted snugly across the child’s chest.

NEVER place the shoulder belt under the child’s arms.

Positioning Booster Use: 40-80 lbs. (18.1-36.3 kg), 43-52” (110.1-132.1 cm), Over 1 year of

!WARNING

Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat. Failure to do this can result in serious injury or death.

Failure to follow these warnings can result in serious injury or death to your child.

age.

36

37

Page 20
Image 20
Eddie Bauer 22859 manual Belt-Positioning Booster Installation