Securing Your Child in the Child Restraint; Dual Buckle Plates
NOTE: Depending on your model, follow the unbuckling and buckling steps that matches your buckle plates.
4 | Snap the harness retainer | |
together. | ||
|
1 |
2 |
Position harness straps over the child’s shoulders.
Push each buckle plate into buckle until you hear a “click”. Remember to always pull up on harness straps to make sure buckle is locked tightly.
5 | Position the harness |
retainer at | |
| with arm pits), away from |
| the child’s neck. |
3 | Pull on harness adjustment |
strap to tighten harness | |
| snugly. |
NOTE: A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.
!WARNING:
Failure to fasten and tighten the harness system correctly can result in serious injury or death.
16 | 17 |
