1 Left side | Right side |
Hook |
|
To child restraint | |
2 |
|
3
4
5
To AttachTop Anchorage Strap: At the adjuster, unlace free end of strap from right side of adjuster slide and loosen into “loops” (1). Put knee in child restriant and push down; attach hook to anchor to estimate how much you need, then unhook
(2).
To loosen top anchorage strap: With adjuster in hand, pull the top strap (3) between adjuster and child restriant to desired length. Attach hook to anchor, check fit, repeat steps if necessary. You must rethread the free end of strap back down through the right slot (5) or the tether will not hold. Tighten strap so “loops” are gone and there is no slack or play.
To tighten tether: With adjuster in hand, pull the top strap (4) between adjuster and hook to the desired length. Attach hook to anchor, check fit, repeat steps if necessary. You must rethread the free end of strap back down through the right slot (5) or the tether will not hold. Tighten strap so “loops” are gone and there is no slack or play.
Belt-Positioning Booster Use
Refer to the “Choosing Restraint and Position” sectionto make sure your child is at the proper weight and height to use the belt- positioning booster.
Lap/Shoulder Belt
Do not use LATCH or tether strap when using the
You MUST fasten the LATCH belt hooks together behind seat.
When your child is over 40 lbs. (18.1 kg) or 43” (110.1 cm) and over 1 year old, you must remove the harness and use this child restraint as a belt- positioning booster.
!WARNING
!WARNING
You must follow the threading diagram exactly. Failure to follow these steps could cause the strap to loosen in a crash, which can result in serious injury or death.
Loose LATCH hooks can result in serious injury or death.
age.
32 | 33 |
