Reinstall Harness
46
Thread the harness down through slot on left side of shell (1), across bottom of
1 |
2 |
From the front of child restraint push buckle’s metal plate through pad and shell. Make sure buckle faces out.
From underneath, pull buckle’s metal clip through pad and shell.
5 4
1
3
2
shell (2) and up through slot on right side (3).
Thread one latch plate onto harness from back to front (4).Thread the harness retainer (5). Do the same to the other harness end. Make sure the harness is not twisted.
Push harness ends through upper slots in shell (6).
Fit loops on harness ends onto the splitter plate.
3 | Pull up on buckle to make | |
sure buckle’s metal plate | ||
| ||
| stops against the shell. |
!WARNING
Failure to place buckle’s metal plate completely through pad and shell can result in serious injury or death to the child.
!WARNING
Failure to reattach the harness correctly, can result in serious injury or death.
38 | 39 |
