Using process
*Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level.
*Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning; the time displayed on the time remain digitron is the total remaining time)
*In soaking, after water inlet it will perform soaking for about
*In selecting "pasthaste" program, the washing machine will set the complete procedures of water level selector, washing, rinsing and spinning automatically.
Push the "RESERVE" button to select suitable reserve wash program
RESERVE
After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve wash program. Refer to reserve button in Page 11 for selection
Confirm the operation of reserve program
Page
Time remianed (minutes)
When the "RESERVE " function is activated, the indicator light of the program you have | Reserve | |
(hours later) | ||
|
set will be off. The "reserve (hours later)" and "time remain (minutes) " indicator lights will be on. During reserve procedure, push the "reserve" button to display the reserve mode. 
To change the running program or cancel the reserve setting, you
need to switch off the power and make new selection.
Push the "START/PAUSE"button
5 Close the lid
As the top lid opened ,the Washer will automatically give an alarm | After finishing wash it'll alarm automatically | |
and stop running , exclusively during supplying water and rinsing. | ||
|