Installation Instructions

Electrical installation

The following are speciﬁc requirements for proper and safe electrical installation of your dryer. Failure to follow these instructions can create electrical shock and/or a ﬁre hazard.

WARNING

ELECTRICAL SHOCK HAZARD

•This appliance MUST be properly grounded. Electrical shock can result if the dryer is not properly grounded. Follow the instructions in this manual for proper grounding.

•Do not use an extension cord with this dryer. Some extension cords are not designed to withstand the amounts of electrical current this dryer utilizes and can melt, creating electrical shock and/

or ﬁre hazard. Locate the dryer within reach of the receptacle for the length power cord to be purchased, allowing some slack in the cord. Refer to the pre-installation requirements in this manual for the proper power cord to be purchased.

WARNING

ELECTRICAL SHOCK HAZARD

•A U.L.-approved strain relief must be installed onto power cord. If the strain relief is not attached, the cord can be pulled out of the dryer and can be cut by any movement of the cord, resulting in electrical shock.

•Do not use an aluminum wired receptacle with a copper wired power cord and plug (or vice versa). A chemical reaction occurs between copper and aluminum and can cause electrical shorts. The proper wiring and receptacle is a copper wired power cord with a copper wired receptacle.

NOTE

Dryers operating on 208 volt power supply will have longer drying times than dryers operating on 240 volt power supply.

Grounding requirements - Electric dryer (USA)

WARNING

ELECTRICAL SHOCK HAZARD Improper connection of the equipment grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded.

For a grounded, cord-connected dryer:

1The dryer MUST be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by a path of least resistance for electrical current.

2After you purchase and install a 3 wire or 4 wire power supply cord having an equipment-grounding

conductor and a grounding plug that matches you wiring system, the plug MUST be plugged into an appropriate, copper wired receptacle that is properly installed and grounded in accordance with all local codes and ordinances. If in doubt, call a licensed electrician.

DO NOT modify the plug you’ve installed on this appliance.

For a permanently connected dryer:

1The dryer MUST be connected to a grounded metal, permanent wiring system; or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance.

137112200B specifications

The Frigidaire 137112200B is an innovative and reliable component designed specifically for use in various refrigerator models. This part is a crucial element in maintaining optimal performance and longevity of your refrigerator, ensuring that your food and beverages stay fresh for extended periods.

One of the standout features of the Frigidaire 137112200B is its compatibility with numerous Frigidaire refrigerator models, making it a versatile replacement option for those needing to service their appliances. Built to high standards, it features durable construction that can withstand the challenges of regular usage. This robustness not only enhances the part's lifespan but also ensures consistent performance over time.

The Frigidaire 137112200B is designed with advanced technologies that promote energy efficiency. It operates seamlessly to maintain the right temperatures inside the refrigerator, which not only contributes to food preservation but also supports lower energy consumption. This can lead to long-term savings on electricity bills, which is an important factor for many consumers.

Installation of the Frigidaire 137112200B is straightforward, making it accessible for those who prefer a do-it-yourself approach to appliance repair. The part can typically be replaced with basic tools, allowing users to restore their refrigerator's functionality without the need for professional assistance. Comprehensive instructions often accompany the product, aiding even the less experienced homeowner.

Another key characteristic of the 137112200B is its role in maintaining optimal airflow within the refrigerator. Proper airflow is essential for the even distribution of cool air, which helps to prevent hot spots and ensures that all areas of the refrigerator remain at a consistent temperature. This feature not only enhances food preservation but also reduces the risk of spoilage.

In conclusion, the Frigidaire 137112200B is an essential component for Frigidaire refrigerators, known for its compatibility, durability, and energy efficiency. Its advanced design facilitates proper temperature regulation and airflow, making it a reliable choice for maintaining freshness and prolonging the life of your refrigerator. Whether you're performing routine maintenance or undertaking a necessary repair, this part exemplifies quality and innovation, reflecting Frigidaire's commitment to excellence in home appliances.