Exhaust direction

INSTALLATION REQUIREMENTS

Exhaust system requirements, continued

Install male ﬁttings in correct direction:

CORRECTINCORRECT

In installations where the exhaust system is not described in the charts, the following method must be used to determine if the exhaust system is acceptable:

1Connect an inclined or digital manometer between the dryer and the point the exhaust connects to the dryer.

2Set the dryer timer and temperature to air ﬂuff (cool down) and start the dryer.

3Read the measurement on the manometer.

4The system back pressure MUST NOT be higher than 0.75 inches of water column. If the system back pressure is less than 0.75 inches of water column, the system is acceptable. If the manometer reading is higher than .075 inches of water column, the system is too restrictive and the installation is unacceptable.

Although vertical orientation of the exhaust system is acceptable, certain extenuating circumstances could affect the performance of the dryer:

•Only the rigid metal duct work should be used.

•Venting vertically through a roof may expose the exhaust system to down drafts causing an increase in vent restriction.

•Running the exhaust system through an uninsulated area may cause condensation and faster accumulation of lint.

•Compression or crimping of the exhaust system will cause an increase in vent restriction.

•The exhaust system should be inspected and cleaned a minimum of every 18 months with normal usage. The more the dryer is used, the more often you should check the exhaust system and vent hood for proper operation.

Directional exhausting can be accomplished by installing a quick-turn 90° dryer vent elbow directly to exhaust outlet of dryer. Dryer vent elbows are available through your local parts distributor or hardware store.

See also CLEARANCE REQUIREMENTS on the next page.

NOTE

Use of 90° quick-turn elbow required to meet minimum installation depth of free-standing dryer:

•Straight back venting allows for 0” (0 cm) installation.

•Venting right with 90° elbow allows for 0.75” (2 cm) installation.

•Venting downward with 90° elbow allows for 0.75” (2 cm) installation.

•Venting left with short, straight adapter and 90° elbow allows for 3.75” (9.5 cm) installation.

•Venting upward with short, straight adapter and 90° elbow allows for 4” (10.5 cm) installation.

137112200B specifications

The Frigidaire 137112200B is an innovative and reliable component designed specifically for use in various refrigerator models. This part is a crucial element in maintaining optimal performance and longevity of your refrigerator, ensuring that your food and beverages stay fresh for extended periods.

One of the standout features of the Frigidaire 137112200B is its compatibility with numerous Frigidaire refrigerator models, making it a versatile replacement option for those needing to service their appliances. Built to high standards, it features durable construction that can withstand the challenges of regular usage. This robustness not only enhances the part's lifespan but also ensures consistent performance over time.

The Frigidaire 137112200B is designed with advanced technologies that promote energy efficiency. It operates seamlessly to maintain the right temperatures inside the refrigerator, which not only contributes to food preservation but also supports lower energy consumption. This can lead to long-term savings on electricity bills, which is an important factor for many consumers.

Installation of the Frigidaire 137112200B is straightforward, making it accessible for those who prefer a do-it-yourself approach to appliance repair. The part can typically be replaced with basic tools, allowing users to restore their refrigerator's functionality without the need for professional assistance. Comprehensive instructions often accompany the product, aiding even the less experienced homeowner.

Another key characteristic of the 137112200B is its role in maintaining optimal airflow within the refrigerator. Proper airflow is essential for the even distribution of cool air, which helps to prevent hot spots and ensures that all areas of the refrigerator remain at a consistent temperature. This feature not only enhances food preservation but also reduces the risk of spoilage.

In conclusion, the Frigidaire 137112200B is an essential component for Frigidaire refrigerators, known for its compatibility, durability, and energy efficiency. Its advanced design facilitates proper temperature regulation and airflow, making it a reliable choice for maintaining freshness and prolonging the life of your refrigerator. Whether you're performing routine maintenance or undertaking a necessary repair, this part exemplifies quality and innovation, reflecting Frigidaire's commitment to excellence in home appliances.