Reversing the hinge
1Carefully pull out the 2 small round hole plugs from the front panel and save. Remove and save the square “T” slot cover by sliding it up and pulling
it out. Move all 3 plugs to the opposite side of the front panel and insert.
ROUND PLUG
SQUARE PLUG
ROUND PLUG 
2Turn inner door assembly over to expose retaining tabs of metal strike. Grip tabs fully with pliers to remove. Discard old metal strike.
3Turn the inner door assembly back over and locate the 2 pan head hinge screws. Remove and save the 2 screws and separate the hinge from inner door assembly.
HINGE SCREWS
REVERSING DOOR
4From the back side of the inner door, pinch the retaining tabs of the plastic square plug to release it. Save square plug for reinstallation.
5Carefully remove the 2 round plugs from the inner door and move them to the opposite holes and reinstall.
OUT
IN 
6Rotate the hinge and move it to the opposite side of the inner door. Attach it with the 2 pan head screws removed previously. Reinstall plastic plug in the square hole next to the hinge.
19