Important Safety Instructions

WARNING

For your safety the information in this manual must be followed to minimize the risk of ﬁre or explosion or to prevent property damage, personal injury or loss of life. Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of this or any other appliance.

WARNING - RISK OF FIRE

Read all of the following instructions before installing and using this appliance:

•Destroy the carton and plastic bags after the dryer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible to children.

•Clothes dryer installation and service must be performed by a qualiﬁed installer, service agency or the gas supplier.

•Install the clothes dryer according to the manufacturer’s instructions and local codes.

•The electrical service to the dryer must conform with local codes and ordinances and the latest edition of the Na- tional Electrical Code, ANSI/NFPA 70, or in Canada, the Canadian electrical code C22.1 part 1.

•The gas service to the dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas Code ANSI Z223.1, or in Canada, CAN/ACG B149.1-2000.

•The dryer is designed under ANSI Z 21.5.1 or ANSI/UL 2158 - CAN/CSA C22.2 No. 112 (latest editions) for HOME USE only. This dryer is not recommended for commercial applications such as restaurants, beauty salons, etc.

•Do not install a clothes dryer with ﬂexible plastic venting material. Flexible venting materials are known to collapse, be easily crushed and trap lint. These conditions will obstruct clothes dryer airﬂow and increase the risk of ﬁre.

•The instructions in this manual and all other literature included with this dryer are not meant to cover every pos- sible condition and situation that may occur. Good safe practice and caution MUST be applied when installing, operating and maintaining any appliance.

WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Clear the room, building or area of all occupants.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the ﬁre department.

Save these instructions for future reference.

Pre-Installation Requirements

Tools and materials needed for installation:

• Adjustable pliers	• Carpenter’s level	• Gas line shutoff valve (gas dryer)
• Phillips, straight, & square bit	• External vent hood	• ½ NPT union ﬂare adapters (x2)
screwdrivers	• 4-inch (10.2 cm), rigid metal or	and ﬂexible gas supply line (gas
• Adjustable wrench	semi-rigid metal exhaust duct work	dryer)
• Pipe wrench for gas supply (gas	• 3-wire or 4-wire 240 volt cord kit	• Metal foil tape (not duct tape)
dryer)	(electric dryer)
• LP-resistant thread tape (for natu-	• 4 in. (10.2 cm) clamp
ral gas or LP supply, gas dryer)

137112200B specifications

The Frigidaire 137112200B is an innovative and reliable component designed specifically for use in various refrigerator models. This part is a crucial element in maintaining optimal performance and longevity of your refrigerator, ensuring that your food and beverages stay fresh for extended periods.

One of the standout features of the Frigidaire 137112200B is its compatibility with numerous Frigidaire refrigerator models, making it a versatile replacement option for those needing to service their appliances. Built to high standards, it features durable construction that can withstand the challenges of regular usage. This robustness not only enhances the part's lifespan but also ensures consistent performance over time.

The Frigidaire 137112200B is designed with advanced technologies that promote energy efficiency. It operates seamlessly to maintain the right temperatures inside the refrigerator, which not only contributes to food preservation but also supports lower energy consumption. This can lead to long-term savings on electricity bills, which is an important factor for many consumers.

Installation of the Frigidaire 137112200B is straightforward, making it accessible for those who prefer a do-it-yourself approach to appliance repair. The part can typically be replaced with basic tools, allowing users to restore their refrigerator's functionality without the need for professional assistance. Comprehensive instructions often accompany the product, aiding even the less experienced homeowner.

Another key characteristic of the 137112200B is its role in maintaining optimal airflow within the refrigerator. Proper airflow is essential for the even distribution of cool air, which helps to prevent hot spots and ensures that all areas of the refrigerator remain at a consistent temperature. This feature not only enhances food preservation but also reduces the risk of spoilage.

In conclusion, the Frigidaire 137112200B is an essential component for Frigidaire refrigerators, known for its compatibility, durability, and energy efficiency. Its advanced design facilitates proper temperature regulation and airflow, making it a reliable choice for maintaining freshness and prolonging the life of your refrigerator. Whether you're performing routine maintenance or undertaking a necessary repair, this part exemplifies quality and innovation, reflecting Frigidaire's commitment to excellence in home appliances.