Custom Program

LG Electronics MFL62512805 owner manual To Install the Drying Rack, To Save a Custom Program

Page 31

CYCLE OPTION buttons

Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function that can be activated by pressing and holding that option button

for 3 seconds.

To Add Cycle Options to a Cycle:

1 Turn on the dryer and turn the cycle selector knob to select the desired cycle.

2 Use the cycle settings buttons to adjust the settings for that cycle.

3 Press the cycle option button for the option you would like to add. A confirmation message will be shown in the display.

4 Press the START/PAUSE button to start the cycle. The dryer will start automatically.

DAMP DRY BEEP

With this option, the dryer will beep when the load is approximately 80% dry. This allows you to remove faster-

drying lightweight items or items that you would like to iron or hang while still slightly damp.

* WRINKLE CARE

Selecting this function will tumble the load periodically

for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when

you are unable to immediately remove items from the dryer. Press and hold the DAMP DRY BEEP button for 3 seconds to activate or deactivate the WRINKLE CARE function.

*CHILD LOCK

Use this option to prevent unwanted use of the dryer or

to keep cycle settings from

being changed while the dryer is operating. Press and hold the EASY IRON button for 3 seconds

to activate or deactivate the CHILD LOCK function. The lock icon will be shown in the display, and all controls are disabled except the ON/OFF button.

NOTE: CHILD LOCK lasts after the end of cycle. If you want to deactivate this function, Press and hold the EASY IRON button for 3 seconds.

To Install the Drying Rack

ENGLISH

1With the dryer door open, slide the rack into the dryer drum.

2Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer.

NOTE: Be sure to remove the drying rack after using the RACK DRY cycle.

If you have a special combination of settings that you use frequently, you can save these settings as a

CUSTOM PROGRAM.

NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program.

*To Save a Custom Program:

1Turn on the dryer and turn the cycle selector knob to select the desired cycle.

2Use the cycle setting buttons to adjust the settings for that cycle.

3Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display.

4Press and hold the CUSTOM PROGRAM button for 3 seconds.

To Recall a Custom Program:

1Turn on the dryer.

2Press the CUSTOM PROGRAM button.

3Press the START/PAUSE button to start the cycle.

Image 31

Contents

Related manuals

LG Electronics MFL62512805 owner manual To Install the Drying Rack, To Save a Custom Program