LG Electronics MFL62512805 owner manual Basic Safety Precautions

Page 4

READ ALL INSTRUCTIONS BEFORE USE

wWARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

BASIC SAFETY PRECAUTIONS

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions, including the following:

Read all instructions before using the dryer.

Before use, the dryer must be properly installed as described in this manual.

Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

Do not reach into the dryer if the drum or any other part is moving.

Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

Do not tamper with controls.

Before the dryer is removed from service or discarded, remove the door to the drying compartment.

Do not allow children to play on or in the dryer.

Close supervision of children is necessary when the dryer is used near children.

Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

The interior of the dryer and exhaust vent should be cleaned periodically by qualified service personnel.

Do not install or store the dryer where it will be exposed to the weather.

Always check the inside of the dryer for foreign objects.

Clean lint screen before or after each load.

California Safe Drinking Water and Toxic Enforcement Act

This act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects, or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.

Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

4

Image 4 Contents
Dryer Thank YOU What to do if YOU Smell GAS Basic Safety Precautions California Safe Drinking Water and Toxic Enforcement ActSafety Instructions for Installation Grounding InstructionsSafety Instructions for Steam Functions Safety Instructions for Connecting Electricity Special Features Ultra-Capacity Stainless Steel Drum With Drum LightIncluded Accessories KEY Parts and ComponentsLeveling Feet Drying RackInstallation Location Requirements ClearancesVenting Requirements RequirementsClearances Recommended installation spacing for cabinet installationLeveling the Dryer Reversing the Door Changing the Dryer Vent Location WWARNINGOption 1 Side Venting Option 2 Bottom VentingVenting the Dryer Routing and Connecting Ductwork Venting the DryerDuctwork Correct VentingElectrical Requirements for Gas Models Only ConnecTING GAS DryersSupply line requirements Connecting the Gas Supply High-Altitude InstallationsElectrical Connection 120-VAC, 60-Hz. grounded 3-prong outletConnecting Electric Dryers Electrical Requirements for Electric Models OnlyConnecting Electric Dryers Four-Wire Connection for Electric Dryers Power CordFour-Wire Connection for Electric Dryers Direct Wire Use UL-listed4-wire #10 AWG-minimum copper conductor cableUse a 30 A, 240 V, UL-listed power cord Three-Wire Connection for Electric Dryers Power CordWith #10 AWG-minimum copper conductor Three-Wire Connection for Electric Dryers Direct Wire Use UL-listed3-wire #10 AWG-minimum copper conductor cableFinal Installation Check Testing Dryer HeatingSpecial Requirements for Manufactured or Mobile Homes Checking AirflowTo activate the duct condition test Duct Condition TestCorrect Venting Restricted or Blocked Airflow Control Panel Features Power ON/OFF Button Cycle Setting ButtonsClean the Lint Filter Operating the DryerSensor Dry Cycles Cycle GuideManual Dry Cycles Sorting Loads Loading the DryerFabric Care Labels Grouping Similar ItemsChild Lock Indicator DisplayCycle Setting buttons DRY Level Time DRYTo Install the Drying Rack Custom ProgramTo Save a Custom Program To Recall a Custom ProgramSteam Functions Steam Functions To Fill the Steam FeederSteam Cycle Guide Sports wearRegular Cleaning Cleaning the Exterior Cleaning the Lint FilterCleaning the Interior Cleaning Around and Under the DryerBefore Calling for Service Problem Possible Causes SolutionsBefore Calling for Service ConsistentKEY Dimensions and Specifications Possible Causes Solutions ProblemProduct Registration Information Write your warranty information below Three 3 years from the dateCanada
Related manuals
Manual 41 pages 44.76 Kb