Frigidaire FFSG5115PW, FFSG5115PA important safety instructions Cycle Options

Page 11

OPERATING INSTRUCTIONS

Cycle Options

To add options, press the corresponding options buttons to illuminate the selections desired. To delete options, press the options buttons again and the indicator lights will turn off. Some options require a “Press & Hold” effort to activate or deactivate the secondary function.

Not all options are available on every model. To protect your fabrics, not all options are available with every cycle. If an option is not appropriate for the cycle, the indicator will not light. Occasionally, a setting and option in the same cycle will conflict with each other, like sanitize temp and damp dry level. When this happens, the option selected first will cause the conflicting option to not be selectable.

NOTE

To change the options after the cycle starts, press pause, adjust the setting and press START to resume the cycle.

energy saver

The energy saver option reduces the drying temperature a few degrees to save energy. In conjunction with automatic moisture sensors, cycle times will increase slightly, but overall energy usage will decrease.

add steam

The add steam option injects steam into the clothing prior to cool down to reduce wrinkling.

wrinkle release

Select wrinkle release if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When chime is selected, a beep will be heard periodically. The load may be removed any time during wrinkle release.

line dry

Select this option to simulate hanging your laundry in a summer breeze combined with the wrinkle-releasing benefits of tumble action. Since drying times are calculated with the dryer’s automatic moisture sensors and heat is radically reduced or eliminated, cycle time will be lengthened. As a result, depending on moisture content of load, overall energy consumption decreases. Available on mixed load, normal, casual, and delicates.

delay start

Press delay start to select a drying time convenient to your schedule or during off peak energy hours. The delay time selected will be displayed and begin counting down when you select START.

NOTE

While counting down during delay start, you will notice your dryer periodically tumbling for a few minutes without heat to redistribute the load, maximizing load freshness.

chime (press & hold)

A signal will sound at the end of the cycle (and periodically during wrinkle release) if this option is selected.

anti static

The anti static option injects steam into the clothing just before cycle completion to reduce static.

control lock

To lock the controls between cycles, press and hold the control lock button for 5 seconds. Repeat to unlock the controls when you are ready to operate the dryer. Use this feature to reduce the likelihood of accidental operation by children.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Use & Care What to do if YOU Smell GAS Important Safety InstructionsModel Number Serial Number Purchase Date Record Your Model and Serial NumbersPrevent Fire Protect Children Features Prepare load for drying Operating InstructionsNormal Operating Sounds Operating Your DryerStart the cycle Check that the lint filter is clean and in placeSelect the appropriate cycle and settings for each load Load the dryer and close the doorFor best results Cycle SelectionCycle Settings For best results Cycle Options Drum Light Other FeaturesDrying Rack on select models Status DisplayDryer Settings Chart Inside Care and CleaningCommon Drying Problems Solutions to Common ProblemsAvoid Service Checklist Warranty Periods Major Appliance Warranty Information
Top Page Image Contents