GE PCVH485EK, PCVH480EK owner manual Connecting the Dryer to House Vent, Do not

Page 18

Installation Instructions

EXHAUSTING THE DRYER (cont.)

CONNECTING THE DRYER TO

HOUSE VENT

RIGID METAL TRANSITION DUCT

For best drying performance, a rigid metal transition duct is recommended.

Rigid metal transition ducts reduce the risk of crushing and kinking.

UL-LISTED FLEXIBLE METAL (SEMI-RIGID) TRANSITION DUCT

If rigid metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit WX08X10077).

Never install flexible metal duct in walls, ceilings, floors or other enclosed spaces.

Total length of flexible metal duct should not exceed 8 feet (2.4 m).

For many applications, installing elbows at both the dryer and the wall is highly recommended (see illustrations at right). Elbows allow the dryer to sit close to the wall without kinking and/or crushing the transition duct, maximizing drying performance.

Avoid resting the duct on sharp objects.

UL-LISTED FLEXIBLE METAL (FOIL-TYPE)

TRANSITION DUCT

In special installations, it may be necessary to connect the dryer to the house vent using a flexible metal (foil-type) duct. A UL-listed flexible metal (foil-type) duct may be used ONLY in installations where rigid metal or flexible metal (semi-rigid) ducting cannot be used AND where a 4diameter can be maintained throughout the entire length

of the transition duct.

In Canada and the United States, only the flexible metal (foil-type) ducts that comply with the “Outline for Clothes Dryer Transition Duct, Subject 2158A” shall be used.

Never install flexible metal duct in walls, ceilings, floors or other enclosed spaces.

Total length of flexible metal duct should not exceed 8 feet (2.4 m).

Avoid resting the duct on sharp objects.

For best drying performance:

1.Slide one end of the duct over the clothes dryer outlet pipe.

2.Secure the duct with a clamp.

3.With the dryer in its permanent position, extend the duct to its full length. Allow 2of duct to overlap the exhaust pipe. Cut off and remove excess duct. Keep the duct as straight as possible for maximum airflow.

4.Secure the duct to the exhaust pipe with the other clamp.

FOR TRANSITION VENTING (DRYER TO WALL), DO:

•DO cut duct as short as possible and install straight into wall.

•DO use elbows when turns are necessary.

Elbows

DO NOT:

•DO NOT bend or collapse ducting. Use elbows if turns are necessary.

•DO NOT use excessive exhaust length. Cut duct as short as possible.

•DO NOT crush duct against the wall.

•DO NOT set dryer on duct .

18

Image 18
Contents Dryers Proper Installation Your Laundry Area When not Using Your Dryer Power Quick StartDry Cycles Timed DrySensor Dry Level Clean Lint Filter message Dry TempDelay Start Extend TumbleDamp Alert Signal LockFabric Care Labels Care and Cleaning of the DryerSorting and Loading Hints Dry LabelsFor Your Safety Before YOU BeginDryer Dimensions Unpacking Your DryerElectrical Connection Bathroom or Bedroom Installation Undercounter InstallationMobile or Manufactured Home Installation Tools YOU will Need Materials YOU will NeedElectrical Requirements For Electric Dryers Grounding InstructionsInstallation Instructions Connecting AN Electric Dryer Connecting Dryer Using 3-WIRE ConnectionTools and Materials YOU will Need to Install Exhaust Duct Exhaust System ChecklistConnecting the Dryer to House Vent Do notUSE only Metal Duct 4″ Diameter 102 mm Recommended Configuration to Minimize Exhaust Blockage Standard Rear ExhaustSide Venting Adding a NEW DuctSide Venting Bottom VentingBottom Venting Dryer Startup Level the DryerPlug Dryer ServicingImportant Notes Hardware UsedRemove the Door Assembly Before YOU StartReplace Door Assembly Minimum clearance to combustible surfaces Installing the Stack Bracket KIT Installation PreparationInstall Bracket to Washer Install Dryer and Bracket on DryerFinalize the Installation GEAppliances.com Before you call for service… Timed DRY Clothes shrink What Is Not Covered in the United States We Will ReplaceWarrantor General Electric Company. Louisville, KY GE Dryer Warranty. For customers in Canada What Is Not Covered in CanadaConsumer Support
Related manuals
Manual 108 pages 47.24 Kb

PCVH480EK, PCVH485EK specifications

The GE PCVH485EK and PCVH480EK are innovative electric ranges that embody the fusion of modern technology and user-friendly design, making them standout appliances for contemporary kitchens. These models showcase exceptional cooking performance and versatility, catering to diverse culinary needs and preferences.

One of the key features of both the PCVH485EK and PCVH480EK is the inclusion of the innovative Convection Cooking technology. This advancement ensures even heat distribution throughout the oven, allowing dishes to cook uniformly and thoroughly. Whether baking pastries or roasting meats, users can expect professional-quality results. The range features multiple cooking modes, including Bake, Broil, and Roast, providing flexibility for various cooking techniques.

The ranges also boast a self-cleaning oven, which simplifies maintenance and keeps the appliance looking new. The self-cleaning feature utilizes high temperatures to burn away food residues, minimizing the need for harsh chemicals and labor-intensive scrubbing. Additionally, both models have a spacious oven capacity, accommodating large meals and multiple dishes simultaneously, making them ideal for family gatherings and entertaining.

Another standout aspect of these models is their user-friendly controls. The digital display and intuitive interface make it easy to navigate through cooking settings and adjust temperatures. For those who appreciate precise cooking, the ranges come with built-in temperature probes that allow users to monitor the internal temperature of their dishes accurately.

Safety is also a priority in the design of the PCVH485EK and PCVH480EK. Both models are equipped with features like a kitchen timer, oven lock, and a reversible cast-iron griddle, ensuring a safe and efficient cooking experience. The radiant cooktop delivers rapid heating for quick meal preparation and features multiple burners with varying heat outputs to accommodate different cooking techniques.

In addition to their impressive performance and safety features, these ranges are designed with a modern aesthetic in mind. Their sleek stainless-steel finish and clean lines make them a stylish addition to any kitchen decor.

Overall, the GE PCVH485EK and PCVH480EK electric ranges are high-performing, dependable appliances that combine advanced cooking technologies with user-friendly features and elegant design, making them a perfect choice for any home chef looking to enhance their culinary experience.