JVC KW-XC410, KW-XC400 manual EXT Input

ENGLISH

Indications	Selectable settings, [reference page]
EXT INPUT*1	CHANGER	: [Initial]; To use a JVC CD changer, [13], an Apple iPod
External input		or a JVC D. player, [23], a JVC compatible satellite
		(SIRIUS/XM) tuner, [24].
	EXT INPUT	: To use another external component, [23].
AUX ADJUST	AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level
Auxiliary input		accordingly, to avoid the sudden increase of the output
level adjustment		level when changing the source from external component
		connected to the AUX input jack on the control panel.
		[Initial: AUX ADJ 00]
TAG DISP	TAG ON	: [Initial]; Shows the ID3 tag while playing MP3/WMA
Tag display		tracks, [15].
	TAG OFF	: Cancels.
AMP GAIN	You can change the maximum volume level of this unit.
Amplifier gain	LOW PWR	: VOLUME 00 – VOLUME 30 (Select this if the
control		maximum power of the speaker is less than 50 W to avoid
		damaging the speaker.)
	HIGH PWR	: [Initial]; VOLUME 00 – VOLUME 50
IF FILTER	AUTO	: [Initial]; Increases the tuner selectivity to reduce
IF filter		interference noises between close stations. (Stereo effect
		may be lost.)
	WIDE	: Subject to the interference noises from adjacent stations,
		but sound quality will not be degraded and maintains the
		stereo effect.
AREA	AREA US	: [Initial]; Select this when using the unit in North or
Tuner channel		South America except for Middle South America.
interval		(FM: 200 kHz; AM: 10 kHz)
	AREA EU	: Select this when using the unit in any other area than
		North, Middle South, and South America. (FM: 50 kHz—
		manual tuning, 100 kHz—auto search; AM: 9 kHz)
	AREA SA	: Select this when using the unit in Middle South America.
		(FM: 100 kHz; AM: 10 kHz)

*1 Cannot be selected if the source is “CD-CH” or “EXT.”

22