Electrolux EDI 96150 user manual Iron Aid programme complete / removing laundry

22 electrolux starting an iron aidtm programme

Iron Aid programme complete / removing laundry

After the Iron Aid phase has ended, 0.00 is illuminated and the message

ANTICREASE appears in the display. If the BUZZER (ALARMA) has been activated, an audible signal sounds at regular intervals.

The Iron Aid programme is automat- ically followed by an anti-crease phase, including brief steam phas- es, which lasts around 90 minutes.

The drum rotates during the anti-crease phase. This keeps the laundry loose and free of creases. It can be removed at any point during the anti-crease phase, ex- cept during steam phases (look for steam animation in the display!). Laun- dry should be removed as quickly as possible.

1.Open the loading door to remove the laundry.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Cleaning and maintenance” section.)

3.Remove laundry one garment at a time.

To retain the effects of the Iron Aid treatment, clothes must be removed one garment at a time during the anti-crease phase and hung imme- diately on a clothes hanger to dry (for at least 5-15 mins, depending on fabric and selected steam level). Do up the buttons and tug the garment into shape, paying particular atten- tion to cuffs and seams.

4. Turn the programme knob to O OFF. Important! After each drying cycle

–Clean the micro-fine filter and fine fil- ter

–Drain the condensed water contain- er

(See section “Cleaning and mainte- nance”.)

5. Close door.