Starting a drying programme
Press the START/PAUSE (INICIO/PAU- SA) button. The programme is started. The programme progress display shows drying progress. The symbols for
DRYING and COOLING appear in the display one after the other. The number of droplets in the dryness indi- cator gradually goes down as the drying process progresses.
Changing a programme
To change a programme which has been selected by mistake once the pro- gramme has started, first turn the pro- gramme selector to O OFF and then reset the programme.
The programme can no longer be changed directly once the pro- gramme has started. If you never- theless attempt to change the programme with the programme knob or an additional function but- ton (except the BUZZER (ALARMA) button), the START/PAUSE (INICIO/ PAUSA) button and Err will flash in the display. The drying programme is not however affected by this.
Putting in extra items or taking items out before end of pro- gramme
1. Open loading door
Warning! Laundry and drum can bec ome hot. Risk of burns!
2. Load or remove laundry items.
starting a drying programme electrolux 27
3.Close loading securely. Lock must audibly lock.
4.Press the START/PAUSE (INICIO/ PAUSA) button to continue the dry- ing cycle.
Drying cycle complete / removing laundry
Once the drying programme has fin- ished, ANTICREASE lights up in the display. If the BUZZER is activated, an audible signal sounds at regular inter- vals.
The drying cycle is automatically followed by a
The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. It can be removed at any time during the
1.Open door.
2.Before removing the laundry, remove fluff from the
3.Remove laundry.
4.Turn the programme knob to O OFF.
Important! After each drying cycle
–Clean the
–Drain the condensed water contain- er
(See section “Cleaning and mainte- nance”.)
5. Close door.