Electrolux EDI 96150 What to do if…, Remedying small malfunctions, Problem Possible cause Remedy

36 electrolux what to do if…

What to do if…

Remedying small malfunctions

If, during operation, the error code (E plus number or letter) appears on the multi-display: Switch the appliance off and on again. Reset programme. Press the START/PAUSE (INICIO/PAUSA) button.

If the error appears again, please con- tact the Customer Care Department, stating the error code.

Problem	Possible cause	Remedy
	Mains plug is not plugged in or	Plug in at mains socket. Check
	fuse is not working correctly.	fuse in fuse box (domestic installa-
Washing machine does		tion).
not work.	Door is open.	Close door.
	Press the START/PAUSE (INI-	Press the START/PAUSE (INICIO/
	CIO/PAUSA) button.	PAUSA) button.
	Programme selector in O OFF	Turn the programme selector to
Drum light is not working.	position.	any programme.
	Defective light bulb.	Replace light bulb (see next sec-
		tion).
Iron Aid programme does	Water tank is empty.	Fill water tank.
not start.
	Wrong programme selected
	(e.g. SYNTHETICS -	Note the composition of the fabric.
	SINTÉTICOS instead of
	COTTON - ALGODÓN).
	Too low a LOAD (CARGA)	Set a higher LOAD (CARGA)
	steam level set.	steam level.
	Too many garments in machine,	Load the machine with fewer gar-
After an Iron Aid pro-	or garments that are too differ-	ments, or only similar ones.
	ent.
gramme, garments are
	Clothes are not removed until	Remove clothes quickly one at a
not sufficiently smooth.
		time from the machine as soon as
	the anti-crease phase is fin-
		possible after the start of the anti-
	ished.
		crease phase.
	Garments not hung on clothes	Hang garments on clothes hang-
	hangers and/or not tugged into	ers, do up buttons and tug gar-
	shape.	ments into shape.
	Multi-layered garments tend to	Reshape multi-layered garments
	lose their shape.	by ironing after they come out of
		the machine.
After an Iron Aid pro-	The Iron Aid programme has
gramme, there are no		Iron creases in again after the Iron
	the effect of smoothing gar-
creases left in the gar-		Aid programme.
	ments.
ments.