Fisher & Paykel DEIX1 installation instructions Lid Lock, Power Failure

Page 29

Lid Lock

Your Intuitive™ dryer locks it’s lid at the start of the drying cycle, providing added safety for you and your family while it is operating. This lock ensures the lid cannot be opened while the drum is rotating.

A lidlock symbol (padlock) appears in the corner of the screen when locked (it disappears when unlocked).

If the lidlock symbol is flashing the lid is in the process of being unlocked. During this stage, the lid still cannot be lifted.

The lid must be closed before the drying cycle can start. If START/ PAUSE is pressed with the lid open, the machine will beep and a message will appear in the display screen Saying “Please close the lid Press start to continue”, to signal that the lid needs to be closed. Once the lid has been closed and START/PAUSE is pressed, the LID LOCK will be activated and the drying cycle will begin.

Power Failure

If the power is cut while your Intuitive™ dryer is operating, the lid will be unlocked. In some circumstances the drum door may not be automatically opened. If this occurs it is best if the dryer is not interfered with. When the power is restored the dryer will automatically resume operating. However if it does not automatically open, first close the lid and start the dryer in the usual manner, after 5 seconds press START/PAUSE. This will cause Intuitive to open correctly with the lid unlocked.

If it is absolutely necessary to remove some items before power is restored follow the steps below:

1Ensure the dryer is disconnected from the power supply.

2Open the lid (this will already be unlocked).

3On the left hand side of the dryer there is a thumb tab that appears when the drum is closed. Press the thumb tab, while rotating the drum by hand away from you (push the drum towards the back of the dryer).

Hold thumb tab down

Push

4Hold the thumb tab down until the drum starts opening.

5Keep rotating the drum until it is fully open and it comes to a stop.

6Now you can remove items from the dryer drum.

7Close the lid once you have removed desired items.

8Re-connect the power supply to your dryer.

The drum door will automatically close and the dryer will resume normal operation when power is restored.

29

Image 29
Contents Dryer Page Contents Warranty Use InstallationTo reduce the risk of fire generally To reduce the risk of fire from lint build-up Exhaust Outlet Location Installation InstructionsLocation Requirements Alcove or Cupboard Installation Requirements Exhausting Designing and Installing a New Exhaust Duct SystemRe-using an Existing Duct System Determine Vent Duct Length and Route Maximum Length of Exhaust DuctMaximum length of 100mm diameter duct with 100mm hood Alternative Installation for Close ClearancesDryer Connection ElectricalSupply Requirements Final Installation Check List InstallationUnpacking Remove PackagingFeatures Getting Started Quickly Press Power Fabric TypeSorting LoadingStart How Dry?Display screen Options MenuHeavy Fabric TypeMixed CasualAIR DRY LightDryness Level Descriptions How Dry?To Select a Drying Option Display ScreenAll About the Options Button… Progress Screen Time DRY OptionsCreasables END of Cycle Beeps Trouble ShootingReminder Remove Delicates Early Reminder Empty Lint BucketL2 Special Items LifecyclesL1 Family Blankets L3 Bulky ItemsJeans DUVET/DOONAUsing Your Dryer Lint Bucket Lid Lock Power FailureRemoving the Lid CleaningPre-Treatment Sprays StainsMachine is beeping and … I can’t Lock the LID If Your Intuitive Dryer Beeps For HelpPressing Power does not turn the dryer on Trouble ShootingStatic problems Fisher & Paykel Undertakes to Manufacturer’s WarrantyThis warranty does not cover New Zealand If You Need Assistance Customer CareAustralia If You Need Assistance Product DetailsNZ AU