Fisher & Paykel DEIX1 Manufacturer’s Warranty, Fisher & Paykel Undertakes to

Page 34

Manufacturer’s Warranty

When you purchase any new Fisher & Paykel whiteware Product you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing.

Fisher & Paykel Undertakes to

Repair or, at its option, replace without cost to the owner either for material or labour any part of the Product, the serial number of which appears on the Product, which is found to be defective within TWO YEARS of the date of purchase.

This warranty DOES NOT cover

AService calls which are not related to any defect in the Product. The cost of a service call will be charged if the problem is not found to be a Product fault. For example:

1.Poor drying performance due to incorrect installation, e.g. no venting system fitted, dryer vent against a wall, blocked lint filter.

2.Poor drying performance due to incorrect loading, e.g. overloading or underloading.

3.Damage from articles in the drum, e.g. bra wires, pens, crayons or dye transfer.

4.Damage caused by incorrect electrical installation.

BDefects caused by factors other than:

1.Normal domestic use or

2.Use in accordance with the Product’s User Guide.

CDefects to the Product caused by accident, neglect, misuse or Act of God.

D Correction of unauthorised repairs.

ENormal recommended maintenance as set out in the Product’s User Guide.

Service under this manufacturer’s warranty must be provided by an Authorised Service Agent (refer to the Customer care section for contact details). Such service shall be provided during normal business hours. This warranty certificate should be shown when making any claim.

Note:

This Warranty is an extra benefit and does not affect your legal rights and applies only to product purchased in New Zealand and Australia.

Please keep this User Guide in a safe place. Do not return to Fisher & Paykel.

34

Image 34
Contents Dryer Page Contents Warranty Installation UseTo reduce the risk of fire generally To reduce the risk of fire from lint build-up Location Requirements Installation InstructionsExhaust Outlet Location Alcove or Cupboard Installation Requirements Re-using an Existing Duct System Designing and Installing a New Exhaust Duct SystemExhausting Maximum Length of Exhaust Duct Determine Vent Duct Length and RouteAlternative Installation for Close Clearances Maximum length of 100mm diameter duct with 100mm hoodSupply Requirements ElectricalDryer Connection Unpacking InstallationFinal Installation Check List Remove PackagingFeatures Sorting Press Power Fabric TypeGetting Started Quickly LoadingDisplay screen How Dry?Start Options MenuMixed Fabric TypeHeavy CasualLight AIR DRYHow Dry? Dryness Level DescriptionsAll About the Options Button… Display ScreenTo Select a Drying Option Progress Screen Creasables OptionsTime DRY Reminder Remove Delicates Early Trouble ShootingEND of Cycle Beeps Reminder Empty Lint BucketL1 Family LifecyclesL2 Special Items Jeans L3 Bulky ItemsBlankets DUVET/DOONAUsing Your Dryer Lint Bucket Power Failure Lid LockPre-Treatment Sprays CleaningRemoving the Lid StainsIf Your Intuitive Dryer Beeps For Help Machine is beeping and … I can’t Lock the LIDTrouble Shooting Pressing Power does not turn the dryer onStatic problems This warranty does not cover Manufacturer’s WarrantyFisher & Paykel Undertakes to Australia If You Need Assistance Customer CareNew Zealand If You Need Assistance Product DetailsNZ AU