Fisher & Paykel DEIX1 Trouble Shooting, Pressing Power does not turn the dryer on

Page 32

Trouble Shooting

Pressing POWER does not turn the dryer on

Is the electrical cord plugged in? If not plug the cord in.

If there is a switch, is it switched on?

Could your household power supply be at fault? (If your plug is suitable, try plugging another electrical appliance into the same outlet).

Check your house circuit breakers and fuses. If they are at fault contact an electrician.

Dryer does not heat

Is the dryer set to the AIR DRY Fabric Care Setting?

Has the dryer progressed to COOLING. (Check the Display Screen).

If the problem persists call for service.

Clothes are still wet/damp

Is the dryer set on DAMP?

Try selecting a higher HOW DRY? dryness level.

Is the drum warm? If not, is the dryer set to the AIR DRY setting?

Try drying similar weight clothes together.

If the problem persists call for service.

Pressing START/PAUSE does not start the dryer

Is the lid open? Shut the lid and press START/PAUSE.

Is there a fault displayed on the display screen? Refer to page 31, – If Your Dryer Beeps For Help.

Dryer is taking a long time to dry

Is the lint bucket full? If so empty it to improve performance.

Is the airflow system free from obstruction?

Has the dryer been vented correctly? Is the venting distance too great?

Is the machine over-loaded?

Have heavyweight items been separated from lightweight items?

Are the clothes very wet when they are removed from the washing machine? Increase your washer’s spin speed.

Are you using the AIR DRY setting?

Is your dryer on LIGHT Fabric Type?

Dryer keeps stopping and starting

Your dryer has a reverse action tumble. When it changes direction it will pause momentarily and will start again in the opposite direction, this is normal.

Has CREASABLES been selected?

32

Image 32
Contents Dryer Page Contents Warranty Installation UseTo reduce the risk of fire generally To reduce the risk of fire from lint build-up Exhaust Outlet Location Installation InstructionsLocation Requirements Alcove or Cupboard Installation Requirements Exhausting Designing and Installing a New Exhaust Duct SystemRe-using an Existing Duct System Maximum Length of Exhaust Duct Determine Vent Duct Length and RouteAlternative Installation for Close Clearances Maximum length of 100mm diameter duct with 100mm hoodDryer Connection ElectricalSupply Requirements Installation Final Installation Check ListUnpacking Remove PackagingFeatures Press Power Fabric Type Getting Started QuicklySorting LoadingHow Dry? StartDisplay screen Options MenuFabric Type HeavyMixed CasualLight AIR DRYHow Dry? Dryness Level DescriptionsTo Select a Drying Option Display ScreenAll About the Options Button… Progress Screen Time DRY OptionsCreasables Trouble Shooting END of Cycle BeepsReminder Remove Delicates Early Reminder Empty Lint BucketL2 Special Items LifecyclesL1 Family L3 Bulky Items BlanketsJeans DUVET/DOONAUsing Your Dryer Lint Bucket Power Failure Lid LockCleaning Removing the LidPre-Treatment Sprays StainsIf Your Intuitive Dryer Beeps For Help Machine is beeping and … I can’t Lock the LIDTrouble Shooting Pressing Power does not turn the dryer onStatic problems Fisher & Paykel Undertakes to Manufacturer’s WarrantyThis warranty does not cover Customer Care New Zealand If You Need AssistanceAustralia If You Need Assistance Product DetailsNZ AU