Eurotech Appliances EDC158 owner manual Recommended Programs Temperature Settings, Anti-Crease

ANTI-CREASE

If the Program knob is not turned to the stop position or the door is not opened at the end of a program, the Anti-crease function begins. This means that the drum rotates the clothes once every minute to prevent creases from setting in. The Anti-crease and end-of-program tone continue until you turn the Program knob to the stop position or open the door to remove the laundry.

END-OF-PROGRAM TONE

At the end of a program, the On/Off light flashes and a tone sounds. Remove the laundry and set the Program knob to the stop position.

INTERRUPTING A PROGRAM

If you wish to interrupt a program to add or remove an item from the dryer, simply open the door. The dryer will tumble for a few seconds before it stops. It will restart when the door is closed. If you leave the door open for more than a few minutes, the power will go off and you will have to reset the program.

CHANGING A PROGRAM

If you decide to change the program setting after you have started the washer, simply turn the knob clockwise to the stop position. Once the light stops flashing, you can set the Program knob to the correct program.

RECOMMENDED PROGRAMS

AND TEMPERATURE SETTINGS

The table below is intended to help you determine which program is best for each type of load.

Cottons/Linens

		Temp	Load
Fabric Type	Program	Setting	Size
Heavy cottons and denims	Extra Dry	Normal	Full
Cottons and linens w/out elastic and/or	Normal	Normal	Full
decorative trim, white and colorfast items
Cotton and linen items that require ironing	Iron Dry	Delicate	Half
Cottons and linens with elastic and/or	Damp Dry	Delicate	Half
decorative trim

Synthetics

		Temp	Load
Fabric Type	Program	Setting	Size
Thick polyester/cotton blends	Extra Dry	Normal	Full
White and colorfast perma press	Normal	Delicate	Half
White and colorfast items that require	Iron Dry	Delicate	Half
ironing
Polyester/acrylic blends, rayon, acetate	Damp Dry	Delicate	Half
Washable silk and nylon	Damp Dry	Delicate	Third

Timed

		Temp	Load
Fabric Type	Program	Setting	Size
Heavy cottons and denims	60'	Normal	Full
Cottons and linens w/out elastic and/or	40'	Normal	Full
decorative trim, white and colorfast items
White and colorfast perma press	40'	Delicate	Half
White and colorfast items that require	20'	Delicate	Half
ironing
Polyester/acrylic blends, rayon, acetate	20'	Delicate	Half
Washable silk and nylon	20'	Delicate	Third

ENGLISH

11