Ricoh Caplio R2 manual Setting a Function to the ADJ. Button ADJ BTN.SET, Reference

Setting a Function to the ADJ. Button (ADJ BTN.SET.)

Each time the ADJ. button is pressed, the camera displays the setting screen in the order of exposure, white balance, and ISO sensitivity.

By using the [ADJ BTN.SET.] option, you can set a function to be activated when the ADJ. button is pressed the fourth time.

Possible Settings	(Refer to)
OFF *Setting upon purchase
QUALITY (PIC/QUALITY)	P.60
AF/MF (FOCUS)	P.62
SHARP (SHARPNESS)	P.66
PHOTOMETRY	P.65

To assign a function to the ADJ. button, follow the steps below.

1. Display the setup menu.

For detailed operation, see P.107.

2. Press the !" button to select [ADJ BTN.SET.] and press the O or $ button.

3. Press the !" buttons to select the desired setting.

4. Press the O or # button.

5. If you pressed the # button in step 4, press also the M button.

This setting will be used until you change it.

Note

If a function is set with [ADJ BTN.SET], the AF target shift function (P.83) available from the ADJ. button at Macro shooting is activated when the ADJ. button is pressed the fifth time.

Reference

For how to use the ADJ. button, see P.57.

Changing Camera Settings

111