Ricoh Caplio R2 manual Changing the Light Metering Photometry, Multi

Changing the Light Metering (PHOTOMETRY)

You can change the metering method (the range to use for metering) to determine the exposure value.

There are three Light Metering Methods available: MULTI, CENTER, and SPOT.

Types of Modes You Can Select

Symbol	Mode	Description
(No Symbol)	MULTI	The entire shooting range is divided into 256 partitions, and subjected to
		photometry for overall decision.
	CENTER	The light metering is determined by a measurement of the whole, with
		the central part emphasized.
		Use this when the brightness of the center and surroundings are
		different.
	SPOT	Light metering is determined by measuring only the central part.
		Use this setting when you want to use the brightness of the center. It is
		useful if there is marked difference in contrast or backlighting.

1. Switch the Mode Selector to 5.

2. Press the M button.

The Shooting Setting menu appears.

3. Press the " button to select [PHOTOMETRY] and press the O or $ button.

4. Press the !" buttons to select the desired setting.

5. Press the O or # button.

Light Metering Method setting is complete.

6. If you pressed the # button in step 5, press also the M button.

The shooting setting menu disappears and the LCD monitor displays the set values.

This setting will be used for shooting until you change it.

A Variety of Shooting Techniques/Playback

65