Ricoh Caplio R2 manual 148

Symptom	Cause		Remedy	Refer
				to
A picture is blurred.	You moved the camera when		Hold the camera with your elbows tight	P.29
	pressing the shutter release button.		on your body. Or use a tripod.
	When shooting in a dark place (ex.		Use the flash. Or, raise the ISO	P.38
	indoor), the shutter speed slows down		sensitivity.	P.79
	and pictures become easily blurred.
The flash does not fire. Or	Flashing is prohibited in the following		For shooting with the flash, change the	P.12
the flash cannot recharge.	statuses:		settings or mode.	P.69
	- White Balance Bracket enabled			P.85
	- Continuous Shooting Mode			P.89
	- Movie Mode			P.156
	In some Scene Modes, flashing may
	be prohibited by default. (see P.156)
	The flash is set to Flash Off.		Deselect the Flash Off with the F	P.38
			button.
	Batteries are running low.		If using alkaline batteries, replace the	P.16
			batteries with a new set. If using
			rechargeable batteries, recharge or use
			the AC Adapter.
Even though the flash	The distance to the subject is greater		Get closer to your subject and shoot.	P.38
fired, the picture is dark.	than 2.1 meters in Telephoto or
	greater than 2.7 meters in Wide-
	angle.
	The subject is dark.		Correct exposure. (Exposure correction	P.76
			also changes the light quantity of the
			flash.)
The image is too bright.	The light quantity of the flash is not		Move a little away from the subject or	P.38
	appropriate.		light up the subject for shooting without
			flashing.
	It is over-exposed.		Use exposure compensation. Cancel	P.71
			Exposure Time.	P.76
	The brightness of the LCD monitor is		Adjust the brightness of the LCD	P.110
	not appropriate.		Monitor.
The image is too dark.	The shot was taken in a dark place		Deselect the Flash Off with the Fbutton.	P.38
	while set to	(Flash Off).
	It is under-exposed.		Use exposure compensation. Set to	P.71
			Exposure Time.	P.76
	The brightness of the LCD monitor is		Adjust the brightness of the LCD	P.110
	not appropriate.		Monitor.
The image lacks natural	The picture was shot in conditions		Add a white object to the composition.	P.77
color.	that are hard for Auto White Balance		Or use a White Balance setting other
	to adjust to.		than Auto.
The date, or recording	The screen display function is set to		Press the DISP. button and switch	P.27
information does not	No Display.		display.
appear.

148