Ricoh Caplio R2 manual 112

For detailed operation, see P.107.

2. Press the !" button to select [AUTO POWER OFF] and press the O or $ button.

3. Press the !" buttons to select the desired setting.

4. Press the O or # button.

5. If you pressed the # button in step 4, press the M button.

This setting will be used until you change it.

Note

• To continue on using the camera after auto power-off, slide the power switch to close the lens cover once (power-off) and slide it again to open (power-on). When the Playback button is pressed, the lens cover does not open but the camera is turned on for use in Playback Mode.

• The Auto Power-off function does not work when the camera is connected to a computer.

• When shooting with Interval Shooting, settings made here are not valid and Auto Power-Off does not work.

Display the setup menu.

1.

Changing Auto Power-Off Settings

(AUTO POWER OFF)

If you do not operate the camera for the set period of time, it will shut off automatically (Auto Power-off) to conserve battery power.

At the time of purchase, Auto Power-Off is set to one minute, but you can change this setting.

Possible Settings

OFF (The Auto Power-Off function does not work)

1 Minute *Setting upon purchase

5 Minutes

30 Minutes

To change the Auto Power-Off setting, follow the steps below.

112