Ricoh Caplio R2 manual Setting the White Balance Manually One Push

Setting the White Balance Manually (One Push)

1. Switch the Mode Selector to 5.

2. Press the ADJ. Button twice.

The White Balance menu appears.

3. Press the !" buttons to select

(One Push).

4. Point the camera at a piece of paper or something white under the lighting conditions for your picture.

5. Press the M button.

White Balance is set.

6. Press the O button.

The setting of white balance is completed and the LCD monitor displays a marking. This setting will be used for shooting until you change it.

If you press the M button in step 5, the screen refreshes to show the White Balance settings made. If the result is not

as expected, repeat steps 4 and 5 to change the settings as many times as required.

Note

In Auto Mode, white balance may not be adjusted correctly for a subject that is mostly dark. In this case, add something white as the subject.

Caution

When shooting with flash, white balance may not be adjusted correctly. In this case, switch to Auto Mode for shooting with flash.

78