Ricoh Caplio R2 manual Disconnecting the Camera from Your Computer

Note

By default, the WIA driver is installed in the following location:

My Computer

Local Disk

Program Files

Caplio Software

WIA Driver

3. Select [RICOH Gate La], check [Always use this program for this action] check box, and then click [OK].

To load images from the camera with assistance from the Windows XP Scanner and Camera Wizard, select [Scanner and Camera Wizard]. Leaving the [Always use this program for this action] check box unchecked will cause the [Caplio R2] screen to be displayed each time you transfer images from the camera, thereby allowing you to choose whether to use RICOH Gate La or the Scanner and Camera Wizard for image transfers.

If your PC is installed with Windows XP Service Pack2 and a warning message is displayed, see P.151.

Disconnecting the Camera from Your Computer:

1.

2.

Turn your camera off by pressing the power button. Unplug the USB cable.

Note

It is recommended that you use the AC Adapter (sold separately) when you are downloading images from your camera.

134