Ricoh Caplio R2 TUsing the Self-Timer, Switch the Mode Selector to Press the T Self-timer button

TUsing the Self-Timer

You can set the Self-timer to shoot after either two or ten seconds. A setting of two seconds is useful for preventing camera shake.

1. Switch the Mode Selector to 5.

2. Press the T (Self-timer) button.

The Self Timer mark appears momentarily in a large size at the center of the LCD monitor and then is displayed at the upper left.

The "10" to the right of the symbol indicates the number of seconds. In this case, if you press the shutter button, the camera will shoot after 10 seconds.

3. Press the shutter release button.

The focus is locked, the flash goes on, and the self-timer starts. Once the picture is taken, the self-timer mode is cleared.

Note

•Each press of the T(Self-timer) button, it selects a function in the following sequence: 10 sec, 2 sec, Self-timer Off, 10 sec, 2 sec.

•Self-timer settings are released when the power is turned off.

•When the self-timer is set to 2 seconds, the flash indicator for self-timer does not fire.

84