Ricoh Caplio R2 manual Turning the Power On/Off, To turn the power on, To turn the power off

Turning the Power On/Off

To turn the power on:

1. Slide the power switch to open the lens cover.

After the start sound, the auto-focus/flash lamp blink for several seconds.

Using the Camera in Playback Mode

If the Playback button is pressed with the lens cover closed, the power is turn on in Playback Mode and the camera can be used in this mode.

To turn the power off:

1. Slide the power switch to close the lens cover.

Caution

It takes longer from power-on until the camera becomes ready for shooting when the flash is enabled than when it is disabled.

Note

Auto Power Off

If the camera goes unused for a set period of time, it will automatically turn itself off to save power. To continue on using the camera, slide the power switch to close the lens cover once (power-off) and slide it again to open (power-on).

Reference

For how to change the Auto Power Off setting, see P.112.

24