Ricoh Caplio R2 manual 1GB

Setting the Frame Rate

The number of shot frames per second (frame rate) in Movie Mode can be selected from 30 and 15.

1. Switch the Mode Selector to 3.

2. Press the M button. The shooting setting menu appears.

3. Press the "button to select [FRAME RATE]. Then press the O or $ button.

4. Press the !" button to select [30 FPS] or [15 FPS].

5. Press the O or # button.

This completes the frame rate setting.

6. If the # button was pressed in Step 5, press the M button.

The shooting setting menu disappears and the LCD monitor displays the set values.

The set values are used for shooting until they are changed the next time.

Note

The movie recording time depends on the capacity of the SD memory card. The recording time is as shown below.

	IN		32MB		64MB	128MB	256MB	512MB	1GB
15FPS 320 X 240	1 min		1 min		2 min	5 min	11 min	24 min	46 min
	23	s	27	s	57 s	59 s	56 s	4 s	17 s
30FPS 320 X 240	42	s	44 s		1 min	3 min	6 min	12 min	23 min
					30 s	2 s	4 s	13 s	30 s
15FPS 160 X 120	5 min		5 min		10 min	21 min	43 min	88 min	169 min
	1 s		18	s	51 s	57 s	44 s	7 s	27 s
30FPS 160 X 120	2 min		2 min		5 min	11 min	23 min	46 min	89 min
	38	s	48	s	45 s	37 s	10 s	42 s	48 s

90