Started
Important Safety Instructions
Setting the Clock
Getting
Getting
• Do not heat unopened food containers; buildup of pressure may cause |
the container to explode and result in injury. |
• Always position oven racks in desired location while oven is cool. If rack |
must be moved while oven is hot, do not let potholder contact hot |
heating element in oven. |
• Use care when opening oven door. Let hot air or steam escape before |
removing or replacing food. Hot air or steam can cause burns to hands, |
face and/or eyes. |
Digital Display
The
To program the
SET
CLOCK/ | BAKE | SET | MIN/SEC | START |
PROBE | HOURS | TIMER | TIME |
Started
• Keep oven vents unobstructed. The oven vent is located at the front of |
the oven and vents into the room. |
• Do not clean door gasket. It is essential for a good tight seal. Care should |
be taken not to rub, damage, or move the gasket. |
• No commercial oven cleaner or oven liner protective coating such as |
aluminum foil should be used in or around any part of the oven. Improper |
oven liners may result in a risk of electric shock or fire. Keep oven free |
from grease buildup. |
• Before |
and other utensils. Do not use your oven to clean other parts. A fan noise |
should be heard during the cleaning cycle. If not, call service before self- |
cleaning again. |
• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF |
OVEN. Heating elements may be hot even though they are dark in color. |
Interior surfaces of an oven become hot enough to cause burns. During |
and after use, do not touch or let clothing or other flammable materials |
contact heating elements or interior surfaces of oven until they have had |
sufficient time to cool. Other surfaces of the oven may become hot |
enough to cause burns, such as the oven vent opening, the surface near |
the vent opening, and the oven door window. |
SAVE THESE INSTRUCTIONS
1.Press the “CLOCK/PROBE”* button once. 12:00 will be displayed with the word SET in the upper right corner.
2.Turn the “SET” knob until the correct
3.Press the “CLOCK/PROBE” button again. The word SET will disappear and the correct time is now set into the timer.
The
there is a Bake Hours or Start Time cycle programmed into the timer.
Analog Display |
|
|
|
|
| |
(Designer Timepiece Models) |
|
|
|
|
| |
The |
|
|
|
|
| |
before any other program |
|
|
|
|
| |
can be used. When your | timer | bake | Set | start | probe | |
oven is first connected to the | hours | time | temp | |||
| ||||||
|
|
|
|
| ||
power in your home, the |
|
|
|
|
| |
digital display will show |
|
|
|
|
| |
00:00. To program the |
|
|
|
|
| |
|
|
|
|
|
1.Push and hold the “timer” and “bake hours” buttons at the same time.
2.Turn the “Set” knob until correct time is displayed on the digital clock.
3.Release “timer” and “bake hours” buttons.
The analog clock will automatically set after the digital time is set.
*NOTE: The PROBE function is included on Premiere Models.
6 | 7 |