Viking M0706VR manual Setting the Bake Hours Program, To Set The Bake Hours Program

Product Controls

Clocks and Timers (Analog Clock)

Setting the Bake Hours Program

The Bake Hours program is used for controlled timing of baked or roasted foods. At the end of the timed cycle, the oven automatically turns off.

Setting the Automatic Start Time Bake Program

The Bake Hours program is used for controlled timing of baked or roasted foods. At the end of the timed cycle, the oven automatically turns off.

To Set The Bake Hours Program

1.Turn the “manual” knob to “upper timed” or “lower timed” position, depending upon the oven mode and oven being used.

2.Set the Oven Function Selector to the BAKE, CONVECTION BAKE, or TRUCONVEC position, depending upon the type of baking being used.

3.Set the temperature control knob to the desired temperature and allow for preheating.

4.Press and release the bake hours button. The timer will display :00 with the words SET and COOK in the upper right corner of the digital display.

5.Turn the “Set” knob until the desired baking time is displayed in hours and minutes. The cook time/remaining time and the word COOK will be displayed.

The word COOK will flash and the tone will sound three times when the time is completed; oven will turn off. The tone will sound twice every ten seconds after completion until timer function is cleared.

To set the Automatic Time Bake Program

1.Set the start time:

A)For Single Ovens – Program the start time by pressing the “start time” button and turning the “Set” knob until the desired start time is displayed. This is the time of day you want the food to begin cooking.

B)For Double Ovens – Press the “start time” button once to set the

starting time for the upper oven (UPPER OVEN will show on the display). Press the “start time” button twice to set the starting time for the lower oven (LOWER OVEN will show on the display). Then program the start time by turning the “Set” knob until the desired start time is displayed. This is the time of day you want the food to

begin cooking.

Clocks and Timers (Analog Clock)

2.Set the desired baking time:

Once the start time is set, the display will switch to :00 and

the words SET, COOK and TIME will appear on the right side of the display. You will now enter the desired baking time.

Turn the “Set” knob until the desired baking time is displayed in hours and minutes. Once the desired bake time is set, the word SET will disappear and the word DELAY will appear in the display indicating that the Bake Hours program has been set.

NOTE: For Double Ovens, the word DELAY will show with either UPPER OVEN or LOWER OVEN depending on which oven has been selected.

3.Set the Oven Function selector to the desired function – BAKE, CONVECTION BAKE, OR TRUCONVEC, etc.

4.Set the temperature control knob to the desired baking temperature.

5.The automatic time bake program is now set!

NOTE: The display will continue to show the amount of bake time that was programmed (this will remain until the programmed start time is reached). You can return the display to clock mode by pressing the “probe/temp” button – Notice that a small clock will be displayed in the upper right corner to indicate that a program is in progress. Switch back to the timer

mode by pressing the “bake hours” button.

6.When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of time at the selected temperature.

NOTE: At one minute from the end of the specified bake program, the oven timer will beep once. At the end of the specified bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will continue until the “start time” button is pressed. The display will then return to displaying the time.

NOTE: Setting the remaining duration time to :00 will cancel the Automatic Bake program.

Product Controls

20 21