Philips MCB204 user manual Clock/Timer, Setting the clock, Setting the timer, English

Clock/Timer

Setting the clock

1In standby or active mode, press CLOCK on the remote control.

➜ The clock digits for the hours flash.

2Press TUNING 4 ¢ (or ¡ / ™ on the remote control) to set the hours.

3Press CLOCK again.

➜ The clock digits for the minutes flash.

4Press TUNING 4 ¢ (or ¡ / ™ on the remote control) to set the minutes.

5Press CLOCK to confirm the time.

Setting the timer

The system can be used as an alarm clock, whereby the CD, USB,TUNER, or DAB is switched on at a set time.The clock time needs to be set first before the timer can be used.

1In standby or active mode, press and hold TIMER on the remote control.

➜ "ON" appears and the hour digits for the start timer starts flashing.

2Press TUNING 4 ¢ (or ¡ / ™ on the remote control) to set the hours.

3Press TIMER again.

➜ The clock digits for the minutes flash.

4Press TUNING 4 ¢ (or ¡ / ™ ) to set

the minutes.

5Press TIMER again.

➜ "OFF" appears and the hour digits for the end timer starts flashing.

6Press TUNING 4 ¢ (or ¡ / ™ ) to set

the hours.

7Press TIMER again.

➜The clock digits for the minutes flash.

8Press TUNING 4 ¢ (or ¡ / ™) to set the

minutes.

9Press TIMER again and then press TUNING 4 ¢ (or ¡ / ™) to select the desired sound

source: CD, USB,TUNER, or DAB.

0Press TIMER again.

➜For CD, USB or DAB mode, "VOLUME XX" appears.

➜For Tuner mode, "P XX" appears, where P stands for the preset number. Press TUNING 4 ¢ (or ¡ / ™) to select the desired radio station. Then press TIMER again, "VOLUME XX" appears.

!Press TUNING 4 ¢ (or ¡ / ™) to set the

volume level.

"Press TIMER again to confirm the time. ➜ The timer is now set and activated.

Notes:

–If no volume level or preset number is selected, default is preset to 12 and 01 respectively.

Activating and deactivating

TIMER

In standby or during playback, press TIMER once.

➜Display shows if activated, and disappears if deactivated.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.

●Press SLEEP on the remote control once or more.

➜Display shows and one of the sleep time options in sequence: SLEEP 0FF, 120, 90, 60, 45, 30,15, 05, SLEEP 0FF...

●To deactivate, press SLEEP on the remote control once or more until “SLEEP 0FF“ is shown, or press ECO POWER STANDBY-ONon the system (or 2on the remote control).

➜ disappears from the display.

English

21