FM Radio Reception
English |
Tuning to radio stations
1Press SOURCE on the set repeatedly or press DAB/FM on the remote repeatedly to select TUNER source.
2Press down on TUNING 4 ¢ (or 5/6 on the remote control) and release the button. ➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING 4 ¢ (or 5/6 on the remote control) briefly and repeatedly until you have found optimal reception.
➜AUTO is displayed and available stations are programmed.The first preset automatically stored will then be played.
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press PROGRAM to activate programming. ➜ The next available preset number flashes for selection.
3Press ALBUM/PRESET 4 3 (or ¡ / ™ on the remote control) to allocate a number from 1 to 20 to this station.
4Press PROGRAM again to confirm the setting. ➜ The preset number and frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press ALBUM/PRESET 4 3 (or ¡ / ™ on the remote control) until the desired preset station is displayed.
Programming radio stations
You can store up to 20 radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.
1Press ALBUM/PRESET 4 3 (or ¡ / ™ on the remote control) to select the preset number where programming should start.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROGRAM for more than 2 seconds to activate programming.
16
