Philips MCB204 Basic Functions, Switching the system on, Power-savingautomatic standby, English

Basic Functions

English

Switching the system on

●Press ECO POWER STANDBY-ON or SOURCE (or 2on the remote control).

➜The system will switch to the last selected source.

●Press DAB/FM, DISC, USB,TAPE or AUX on the remote control.

➜The system will switch to the selected source.

To switch the system to standby mode

●Press ECO POWER STANDBY-ONon the system (or 2on the remote control).

➜ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player's memory.

To switch the system to Eco-power standby mode

●Press and hold ECO POWER STANDBY-ON(y on the remote control) for more than 2 seconds.

➜ The display will go blank.

Power-saving automatic standby

The power-saving feature automatically switches to standby 15 minutes after a CD playback has ended and no control is operated.

Adjusting volume and sound

1Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+on the remote control).

➜ The display shows the volume level VOL and a number from 0-31. “MIN” denotes the minimum volume level and “MAX” denotes the maximum volume level.

2Press DSC on the remote control repeatedly to select the desired sound effect: FLAT, CLASSIC, JAZZ, POP or ROCK.

3Press DBB to switch bass enhancement on or off.

➜ The display shows if the DBB is activated.

4Press MUTE on the remote control to interrupt sound reproduction instantly. ➜ Playback will continue without sound.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls.

11