Cleaning the Condenser

The condenser should be cleaned about once a month. If you have pets, you should probably clean it more often. To clean the condenser, follow the steps below:

1.Open the door to access the condenser.

2.Turn the levers on the condenser cover to a vertical position and lift the cover off (Fig. 1).

3.Turn the three levers on the condenser to a vertical position and remove the condenser by grasping the handle and pulling forward (Fig. 2).

4.Spray the filter with warm water until all of the lint is removed (Fig. 3 and 4). Allow the condenser to air dry before replacing it into the unit.

NOTE: Do not put the condenser into a dishwasher. And do not use any sharp metal objects or a wire brush to clean the condenser. Also, do not poke anything between the fins.

5.Make sure the handle is at the bottom and carefully replace the condenser into the unit.

6.Return the three levers on the condenser to a horizontal position to lock the condenser into place.

7.Replace the access door and return those levers to a horizontal position.

ENGLISH

Fig. 1

Fig. 2

Fig. 3

Fig. 4