Selecting a programme and operating your machine
11
Ending the programme through cancelling
The programme which is selected first will keep on going even if the position of the programme selection button is changed. A new programme can be selected or the original drying programme changed after a programme has been cancelled. In order to cancel the selected programme press the Start/Pause/Cancel button for about 3 seconds. The clean filter, tank
full andwarning LEDs will light up at the end of this period for reminding purposes.
As the inside of the machine may be excessively hot when you cancel the programme while the machine is running, activate the Freshen up programme to cool it down.
If the machine is stopped during any drying programme, and if the position of the programme selection knob is changed, an audio signal will be heard (if the Buzzer Cancel function is not selected). The machine will not start even if the Start/ Pause/Cancel button is pressed, unless the programme selection knob is returned to the initial programme. The paused programme must be cancelled in order to change the drying programme.
End of programme
The End/Wrinkle Guard, clean filter and tank full warning LEDs on the programme follow up indicator will light up when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle. Press the On/Off button to shut down the machine.
Important!
Clean the filter and drain the water tank after each drying process.