4
Installation instructions
Technical specifications
| Specification |
Height / Height for | 850 / 820 |
Width (mm) | 595 |
Depth / Depth for | 540 |
Height adjustment of feet (mm) | 5 |
Length of drain hose (mm) | 1400 |
Diameter of drain hose (mm) | 10 |
Highest point of the hose (mm) | 800 |
Weight, unpacked | 36 |
Voltage | 220 – 240V, 50 Hz |
Connected load | 2000 – 2200 W |
Fuse protection | 16A |
The proper location
Install your machine in environments which have no risk of freezing and in a stable and level position.
Do not install the machine behind lockable door, a sliding door, or a door that is hinged on the opposite side to that of the dryer, in such a way that the door of the machine cannot be opened fully. Do not place your machine on a carpet covered floor, a long pile rug or on similar surfaces. Operate your machine in a well ventilated,
Make sure that your machine is not placed on the power cable.
Place it at least 30 mm away from the edges of other furniture and walls. Place the machine on a sound floor.
A special part (Part No. 791746) must be used if the machine is to be installed under a counter or in a cupboard. This replaces the top trim and must be installed by a Fisher & Paykel Authorised Repairer. Never operate the machine without the top trim.
If the machine is to be placed on top of a washing machine, the approximate weight together may reach 180 kg when they are full.
A stacking kit should be used between the products, fitted to the washing machine. Stacking Kit White Part No. 790691
Levelling
In order to ensure that your machine operates quietly and
Balance the machine by adjusting the front feet. Loosen the feet by hand, and adjust them until the machine stands level and does not rock.
Never unscrew the adjustable feet from their housings.
Two plastic pieces supplied with the Installation Instructions and User Guide prevent your machine from slipping on wet and slippery surfaces. Tilt your machine backwards to install these plastic parts. Fit the plastic parts to the front adjustable feet. Press on the plastic parts to fix them in their places. Check the balance of your machine again and readjust the adjustable feet if necessary.