Beko DVTC 60 W manual Preparing laundry for drying, Correct load capacity

Page 12

dripping water must not be put into the dryer.

Items cleaned or washed with gasoil/ fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.

Do not dry items cleaned with industrial chemicals in the dryer.

Do not dry your unwashed laundry in the dryer.

Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.

Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the fabric softener or the product.

Do not dry the underwear reinforced with metal parts in the dryer. If these metal reinforcements loosen and break during drying, they will damage your dryer.

Preparing laundry for drying

Check all laundry items before loading them into the product to make sure that there are no lighters, coins, metal items, needles and etc. in their pockets or on any part of them.

Fabric softeners and similar products must be used in accordance with the instructions of the manufacturer of the relevant products.

All laundry must be spun at the highest spin speed that your washing machine allows for the laundry type.

Laundry may be tangled after washing.

Separate your laundry before placing them into your dryer.

Sort your laundry according to their types and thicknesses. Dry the same type of laundry together. E.g.: fine kitchen towels and table cloths dry

12

faster than the thick bath towels.

Correct load capacity

A Consider the information in the "Programme Selection Table". Always start the programme in accordance with the maximum load capacity.

CAdding laundry to the machine more than the level shown in the figure is not recommended. Drying performance will degrade when the machine is overloaded. Furthermore, your dryer and your laundry can be damaged.

CPlace your laundry into the drum loosely so that they will not get tangled.

CLarge pieces (E.g.: bed sheets, quilt covers, large tablecloths) may bunch- up. Stop the dryer 1-2 times during drying process to separate bunched- up laundry.

EN

Image 12
Contents Dvtc 60 W Explanation of symbols Read this manual prior to initial operation of the productInstallation Fluff filterYour Dryer OverviewTechnical Specifications Important safety information General safetyChildren’s safety Intended useInstallation Appropriate installation locationUnder Counter Installation Adjusting feet First useDisposing of packaging material Transportation of the machineElectrical Connection İnitial Preparations For Drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machinePreparing laundry for drying Correct load capacityHome articles GarmentsLow temperature Start/Pause/Cancel buttonSelecting a Programme and Operating Your Machine On/Off buttonTimer programmes Preparing the machineMain programmes Anti-creasingProgramme selection and consumption table Timer follow-up indicator Auxiliary functionStarting the Programme Changing the programme after the programme has startedEnding the programme through cancelling End of programmeQuick instructions for daily use Maintenance and cleaning Fluff filterSolution suggestions for problems Door Reversal Guarantee What is covered?What is not covered? Important notesService Service once the manufacturers guarantee has expiredRepublic of Ireland UK Mainland & Northern Ireland25 EN 26 EN 27 EN 28 EN