Solution suggestions for problems | Beko DVTC 60 W instruction

9Solution suggestions for problems

Problem	Cause	Explanation / Suggestion
Drying process	The filter might have not been	* Meshes of the filter may be clogged.
takes too much	The filter might have not been	* Meshes of the filter may be clogged.
takes too much	cleaned.	Wash with water.
time.	cleaned.	Wash with water.
time.

Laundry comes	* The filter might have not been	* Meshes of the filter may be clogged.
Laundry comes	cleaned.	* Meshes of the filter may be clogged.
out wet at the end	cleaned.	Wash with water.
out wet at the end	* Excessive laundry might have been	Wash with water.
of drying.	* Excessive laundry might have been	* Do not overload the machine.
of drying.	loaded in.	* Do not overload the machine.
	loaded in.
	* It might have not been plugged in.
	* The loading door may be ajar.	* Make sure that the machine is plugged in.
Machine does not	* Programme might have not been set	* Make sure that the loading door is
switch on or the	or the «Start/Pause/Cancel» button	properly closed.
programme does	might have not been pressed.	* Make sure that the programme has been
not start. Machine	* «Childproof lock» might have been	set and it is not in “Pause” mode.
is not activated	activated.	* Deactivate the childproof lock.
when set.	* The condenser cover on the models	* Make sure that the condenser cover and
	with a condenser might not be closed	the red lock is closed securely.
	securely.
Programme has		* Make sure that the loading door is
Programme has	* The loading door may be ajar.	properly closed.
been interrupted	* The loading door may be ajar.	properly closed.
been interrupted	* Electricity may be cut off.	* Press «Start/Pause/Cancel» button to
without any cause.	* Electricity may be cut off.	* Press «Start/Pause/Cancel» button to
		start the programme.
		* Dry only the laundry which is suitable for
Laundry has		drying in your machine after checking the
shrunk, become	* A programme suitable for the laundry	labels on your clothes.
felted or	type might have not been used.	* Select a programme with suitable low
deteriorated.		temperature for the laundry type to dry your
		clothes.
Drum light does
not come on.	* The machine might have not been	* Make sure that the machine is On.
(for models	started by using the On/Off button.	* Call the authorized service to replace the
equipped with a	* Bulb may have blown.	bulb.
lamp)
0 / Anti-creasing”	* The 2-hour anti creasing programme	* Turn off the machine and take out the
0 / Anti-creasing”	to prevent laundry from creasing might	* Turn off the machine and take out the
LED flashes.	have been activated.	laundry.
	have been activated.
0/ Anti-creasing”	* Programme has come to an end.	* Turn off the machine and take out the
LED is on.	* Programme has come to an end.	laundry.
LED is on.		laundry.

“Filter cleaning”	* Filter might have not been cleaned.	* Clean the cover filter.
LED flashes.	* Filter might have not been cleaned.	* Clean the cover filter.
LED flashes.

A Call an authorised service agent if the problem persists.

21 EN