Changing the programme after it has started

Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.

You may repeat laundry adding or removing process as many times as you desire during drying. However, this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly. Therefore, it is recommended to add laundry before the drying programme has started.

CAUTION: As the inside of the machine will be excessively hot when you cancel the program while the machine is running, activate the ventilation program to cool it down.

Operating the product

C Child-proof Lock is deactivated when the machine is switched off and on with On/ Off/Cancel button.

When the Child-proof Lock is activated:

Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt.

5.13Changing the programme after it has started

After the machine starts, you can change the selected programme and dry your laundry in a different pro- gramme.

1. If you want to select Extra Dry programme instead of Iron Dry programme, press and hold the Start / Pause button to stop the programme.

2. Select Extra Dry programme by turning the Programme Selection knob.

3. Press the Start/Pause button to start the program.

Adding / removing laundry in Pause mode

In order to add or take out laundry after the drying pro- gramme has started:

1.Press Start/Pause button to switch the machine to Pause mode. Drying process will stop.

2.While in Pause mode, open the loading door, add or

take out laundry and close the loading door. 3.Press the Start/Pause button to start the program.

C If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode, then the current program is aborted and new programme information is displayed.

CAUTION: Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running. Surfaces of the drum are hot.

5.14 Canceling the programme

If you want to stop drying and cancel the programme for any reason after the machine has started to run, press and hold the On/Off/Cancel button for 3 seconds.

5.15 End of programme

Lint Filter Cleaning and Water Tank warning symbols light up in the programme follow-up indicator when the programme comes to an end. The loading door can be opened and the machine becomes ready for a second cycle.

Press On/Off/Cancel button to switch off the machine.

If Anti-creasing function is activated and

	the laundry is not taken from the machine
C at the end of the programme, 2-hours
	(depends on selection) Anti-creasing
	programme is activated.

C	Clean the lint filter after each drying.
C	(See "Lint Filter and Loading Door Inner
	Surface")

C Drain the water tank after each drying cycle. (See "Draining the water tank")

22 / 28 EN	Dryer / User Manual
22 / 28 EN